Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: HallelujahAl on June 02, 2009, 05:51:05 PM

Title: Bellows Straps vs Gravity Lock
Post by: HallelujahAl on June 02, 2009, 05:51:05 PM
Hi - the old Heligonka (http://hallelujahal.wordpress.com/category/heligonka-restoration-projekt/) that I'm currently refurbing was fitted with an internal gravity lock system for the bellows. Am thinking about replacing it with the more conventional bellows straps but am torn - should I shouldn't I? If I were to replace with conventional straps where should I position the fixings? The bellows endframes are very wide and are connected by means of a hook fixing to the treble and bass ends.

Anyone got an opinion?
AL
Title: Re: Bellows Straps vs Gravity Lock
Post by: Falseknight on June 02, 2009, 10:42:41 PM
I'd be tempted to keepit original if the system works.

That said I'm into frets and restored campervans, so I could be described as biassed ;)
Title: Re: Bellows Straps vs Gravity Lock
Post by: James Fitton on June 03, 2009, 09:33:35 AM
You've pricked my curiosity here. What on earth is an internal gravity lock? Sounds like something from the Starship Enterprise!
Title: Re: Bellows Straps vs Gravity Lock
Post by: graememackay on June 03, 2009, 11:13:08 AM
I have an internal lock on my Morino and straps on my Gaelic. 

Give me an internal lock anyday!  They are much tidier and because the lever is in behind the keyboard, confuses the hell out of people who want to have a shot of my box!  >:E Works as a security measure too!

Saves the bellows too, there is always a bit of rubbing with straps and can wear them down.

Keep the internal lock.  It'll save you drilling extra holes in your box too.
Title: Re: Bellows Straps vs Gravity Lock
Post by: ladydetemps on June 03, 2009, 11:14:45 AM
You've pricked my curiosity here. What on earth is an internal gravity lock? Sounds like something from the Starship Enterprise!
i was gonna say that too. Is this a cyber melodeon?
Title: Re: Bellows Straps vs Gravity Lock
Post by: Steve_freereeder on June 03, 2009, 11:16:12 AM
You've pricked my curiosity here. What on earth is an internal gravity lock? Sounds like something from the Starship Enterprise!
It's an internal catch to keep the bellows in their closed position when the melodeon is not in use. These days they're pretty rare and bellows straps provide the same function.

It works by having a a hook-type latch operated by a weight. To open the bellows from latched, you have to turn the instrument partly upside down which causes the weight to move upwards and frees the latch. To re-latch the bellows prior to stowing the instrument, you close the bellows completely, and then partly invert the instrument whilst keeping the bellows closed. On returning to an upright (or sideways) position, the weight moves down and holds the latch in place.  
Title: Re: Bellows Straps vs Gravity Lock
Post by: HallelujahAl on June 03, 2009, 12:23:50 PM
Quote
Keep the internal lock.  It'll save you drilling extra holes in your box too.

Yup - think that's what I'm going to do. Adds to the curiosity of the box and as you say - involves less holes being pushed into the box.

I'm intrigued however that you have a lever mechanism on your Morino that operates it? This box of mine just has an internal bar and catch built into the bellows frame. The hook that the catch latches onto protudes from the bass end.
AL
Title: Re: Bellows Straps vs Gravity Lock
Post by: graememackay on June 03, 2009, 01:20:22 PM
Similar idea really, I have a hook attached to the Bass Reed block, and a bar attached to the treble reeds at one end and the lever at the other.  It's easier to show it than explain.  Another job for the workshop I think.
SimplePortal 2.3.5 © 2008-2012, SimplePortal