Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Tommy Girl on June 05, 2009, 11:48:31 AM
-
Could anyone advise me on how how best to fix my Castagnari Lilly, the E min/B maj button has failed ... the wire attaching it to whatever is inside (sorry I have never had the nerve to open a box up and look at how it works, bit of a girlie I know) has become completely detached. I've been told it should be easy to fix so I unscrewed the feet at the bass end expecting the bottom plate to fall open but it didn't so I am now competely stuck. any help / advice would be great
regards
Elaine
-
Could anyone advise me on how how best to fix my Castagnari Lilly, the E min/B maj button has failed ... the wire attaching it to whatever is inside (sorry I have never had the nerve to open a box up and look at how it works, bit of a girlie I know) has become completely detached. I've been told it should be easy to fix so I unscrewed the feet at the bass end expecting the bottom plate to fall open but it didn't so I am now competely stuck. any help / advice would be great
regards
Elaine
The bass cover can be quite tight, it also worth removing the LH strap to get better access to the bass cover, and to the mechanism.
It might or might not be easy to replace the button and its wire rod. There are various methods used to make the pivot where the rod joins on. Some of them are quite prone to wear after a lot of use, so how you replace the rod will depend on how it was originally attached, and on what has happened to allow it to detach.
-
Thanks for your help, the other half managed to get the cover off and we found that a rod had been disconnected as a sort of 'half washer' thing had come off. We have reassembled it and given the whole thing a pinch with the pliers, fingers crossed
Elaine
-
Ah yes, those pesky circlips (the half-washer is called a circlip).
I have some in stock if anyone should happen to lose one.