Melodeon.net Forums

Discussions => Recordings and Videos => Topic started by: Mike Hirst on February 22, 2016, 07:43:20 PM

Title: old school audio
Post by: Mike Hirst on February 22, 2016, 07:43:20 PM
Recent posts re usb mics (http://forum.melodeon.net/index.php/topic,18285.msg223955.html#msg223955) set me thinking. Apropos of nothing I elected to turn the matter on it's head.  I recorded piano and accordion parts using my vintage Tandberg 12 tape machine. I mixed the two mono tracks to create a faux stereo image. Other tools included a home made spring reverb; EP100 analogue delay; and a homebrew passive summing mixer. I couldn't have done it without the patchbay. I had cables running across the room and back again. hardest part was avoiding ground loop hum. careful gain staging kept tape hiss to a minimum. I probably could have pushed the tape harder.

I enjoyed the process, so I thought I'd share the results.

This is my recording of Valse a momo (Maurice Larcange):

http://libtrad.eu/mp3/momo_tandberg_mix.mp3

I used the Primatona IV. I particularly fond of the combination of musette tuning with spring reverb. analogue tape adds extra dirt. The Tandberg 12 was top of the range in 1966. I reckon it's a pretty good match for it's close contemporary the Primatona IV.

Title: Re: old school audio
Post by: rees on February 22, 2016, 08:37:18 PM
Great sound, Mike. Hard to reproduce that in GarageBand  ;)
Title: Re: old school audio
Post by: stevejay on February 24, 2016, 02:19:29 PM
I think it sounds great. You could have taken your time a bit with the tempo, it sounded just a bit rushed.
As I said, I liked it.
Title: Re: old school audio
Post by: gmatkin on March 04, 2016, 10:39:06 AM
Very nice, I'd say.
Title: Re: old school audio
Post by: Mike Hirst on March 05, 2016, 09:46:15 AM
Thankyou all for your positive feedback.

Following the initial flurry of excitement I decided to re-record the momo track - with disastrous results. The tape recorder developed a sudden and serious failure which manifested itself as a series of random spikes, some large, some small, constant, even when recording without mics or other sound source.

I have a good collection of vintage gear. I'm OK with cleaning and basic maintenance, but anything involving a soldering iron is above my pay grade. Last year I managed to burn a hole through a PCB while attempting to replace a USB socket!!

I used to have a couple of repair guys, one in Leeds and the other in Bradford. Both have now retired and/or died. I spent a week talking to every hifi repair shop in the North of England without finding anyone who works with open reel recorders. Felling brave I spent a couple of night staring at a schematic before removing screws and examining the interior workings. Caps looked OK, all was clean, with the exception of the switch mechanism. A quick clean yielded immediate improvement. Careful cleaning eliminated the problem completely.

Yesterday afternoon I made a new recording of Valse A Momo - twin track mono, mixed using the homemade spring reverb, and little bit of analogue compression:

http://libtrad.eu/mp3/momo_mono_tandberg12.mp3

I'm pleased with the results. Recording to tape the noise floor is almost non existent; mixing I'm picking up a slight background hiss from some of the outboard gear.

WRT to tempo. I have a recording of Maurice Larcange playing the piece at approx. 210 bpm, this then is the same tempo that I use. Typically most musette waltz recordings fall somewhere between 195 1nd 215 bpm. Playing to the metronome is an art in itself. Listening to recordings I can hear points where I am dragging the pace to let the metronome catch up. With this new recording I tried hard to play just ahead of the beat.
Title: Re: old school audio
Post by: Stig Bubblecard on March 05, 2016, 10:18:15 AM
Am I alone in not being able to access Mike's recordings in IE11 on Windows 7 Home Premium? Each time I try, I draw a blank with a 'This page can’t be displayed' message. Everything is fine in Firefox but it is so annoying. I've Googled the daylights out of this issue with no success. Any ideas anyone? Sorry Mike & Theo if I've hijacked the thread.  :(
Title: Re: old school audio
Post by: Mike Hirst on March 05, 2016, 11:48:06 AM
Am I alone in not being able to access Mike's recordings in IE11 on Windows 7 Home Premium? Each time I try, I draw a blank with a 'This page can’t be displayed' message. Everything is fine in Firefox but it is so annoying. I've Googled the daylights out of this issue with no success. Any ideas anyone? Sorry Mike & Theo if I've hijacked the thread.  :(

Not sure why the link doesn't work. I've transcoded the source to create audio files in other formats. Maybe one of these will work better.

Title: Re: old school audio
Post by: Stig Bubblecard on March 05, 2016, 03:04:35 PM
Mike

The inner bulleted links play fine on Winamp & Windows Media Player respectively.
The outer two (.mp3 * .wma) stubbornly report the '...page can't be displayed' message. It would seem that I am a codec short somewhere along the line but, as I said, I can't pin it down.

Thanks for your trouble though & great stuff from you as always!

Dave
Title: Re: old school audio
Post by: Anahata on March 05, 2016, 04:50:40 PM
The first two play fine here, the last two don't play but downloaded as files. That's with Chrome on Linux. Once downloaded, mplayer played them fine.
One of the nice things about the HTML5 <audio> element is that you can put several different encodings of the same track on the one link, and everybody's browser will automatically pick one it understands.

I like these better production-wise, with less reverb.
As for the music itself - fabulous  (:)

Next step: get a carbon microphone like the one the late Ralph Jordan used for one track (just for fun) of his solo CD "Eloise". Taking things from retro to positively steampunk.
Title: Re: old school audio
Post by: Stig Bubblecard on March 08, 2016, 11:07:23 AM
In case it helps anyone - I uninstalled the Windows Media Player & then reinstalled it.

Everything is now working as it should including Mike's original hyperlink.  :D

Dave
SimplePortal 2.3.5 © 2008-2012, SimplePortal