Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: dino.pafftti on March 12, 2016, 05:41:39 PM
-
I have a new Cagnoni reeds. been 20 years package,,, I thought to put them on a new project, but, but.... Valves come off as a :-\
Maybe a bad glue,, Can I glue valves the Bison kit contact adhesive glue ? or maybe a Titebond wood glue ? or what is good
Thanks... (:)
-
I have a new Cagnoni reeds. been 20 years package,,, I thought to put them on a new project, but, but.... Valves come off as a :-\
Maybe a bad glue,, Can I glue valves the Bison kit contact adhesive glue ? or maybe a Titebond wood glue ? or what is good
Thanks... (:)
Don't use wood glue.
Clear contact adhesive is good. Just a light coating on the end of the valve (5 mm to 10 mm depending on the valve size) and press gently into place on the reed plate. No need to put any glue on the reed plate, just the end of the valve. It works fine.
-
OK.. (:) Thank. You :|||:
-
I use Bison contact adhesive in exactly the way Steve describes; works really well.
Graham
-
very good ... thanks,
-
I use gasket shellac.
-
I use gasket shellac.
Never heard of anyone using that before. It seems a bit like overkill to me. Does it come off cleanly and easily when you want it to?
Also, the product information (http://www.itwconsumer.com/versachem-products/product.cfm?id=Gasket%20Shellac-129) indicates a 24-hour curing time which is far too long to be practical when you are replacing valves and tuning as consecutive work.
Valves attached with contact adhesive as described earlier are ready to be used within a few minutes.
-
Shellac seems to be favoured by concertina repairers who are gluing leather valves to wood. I've not previously heard of any one using shellac on accordion or melodeon valves either.
I have, for many years, used contact as described above, applying to one surface only. However, in Oz, they have recently legislated the removal of certain chemicals from this type of product in an attempt to reduce "improper use" (i.e. glue sniffing). The resulting compound is now virtually useless as anything other than a contact adhesive as it skins in milliseconds, virtually as soon as it leaves the tube.
I am yet to find a suitable alternative produced, locally or legally imported. I might just have to try shellac myself....
-
I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.
-
I think that the animal glue was used before in Finland, (bone glue) reeds valves
-
I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.
That sounds pretty much like Bison - much cheaper and easier to find in the shops than Bostik over here.
Graham
-
I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.
That sounds pretty much like Bison - much cheaper and easier to find in the shops than Bostik over here.
Graham
GPS, which Bison glue do you use? Doing a search, I see Bison Tix, and Bison Kit.
-
I have heard of shellac used for accordion valves in the old days. Modern adhesives seem much better.
Malcolm, in Europe there is a solvent free contact adhesive sold by Bostik that works well. It doesn't form strings like the solvent based stuff, but I've found it has a greater tendency for the nozzle of the tube to clog up during use and during storage.
That sounds pretty much like Bison - much cheaper and easier to find in the shops than Bostik over here.
Graham
GPS, which Bison glue do you use? Doing a search, I see Bison Tix, and Bison Kit.
Bison Kit. It's what's available here, and it works well.
Cheers
Graham