Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: tom f on March 13, 2016, 08:23:56 PM

Title: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: tom f on March 13, 2016, 08:23:56 PM
Has anyone had any experience of using Olivisc patches to hold pallets to pallets arms.  It would be a perfect match for the thin leather glued patches that were used originally on an old Hohner.  Just wondering if the glue was up to it?
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Lester on March 13, 2016, 08:48:55 PM
Has anyone had any experience of using Olivisc patches to hold pallets to pallets arms.  It would be a perfect match for the thin leather glued patches that were used originally on an old Hohner.  Just wondering if the glue was up to it?

I would expect it to be almost certainly doomed to failure. The adhesive on olivisc is only just strong emough to hold itself in place prior to reeds being screwed down.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Steve_freereeder on March 14, 2016, 07:52:44 AM
Has anyone had any experience of using Olivisc patches to hold pallets to pallets arms.  It would be a perfect match for the thin leather glued patches that were used originally on an old Hohner.  Just wondering if the glue was up to it?

I would expect it to be almost certainly doomed to failure. The adhesive on olivisc is only just strong emough to hold itself in place prior to reeds being screwed down.

Yes, what Lester said.

But if you really want to use it, you could try using additional glue to fix the olovisc patches. PVA would work but it sets too hard and would make subsequent removal at a future date difficult and you could end up wrecking the pallets. Better to use hide glue or fish glue. Also you would probably need to get rid of the self-adhesive coating on the olovisc (use a solvent such as acetone or meths?) so that your new glue would adhere properly.

Overall, too much of a faff, I think. Far better to obtain some thin leather in the right colour and use that.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Theo on March 14, 2016, 10:14:59 AM
Bellows tape, cut into small strips can be used too.  I've seen it used as original figment on Italian made boxes.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: 911377brian on March 14, 2016, 11:08:09 AM
Could be a figment of your imagination, Theo... (:)
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: tom f on March 14, 2016, 05:55:37 PM
Many thanks for your thoughts.  I agree that the adhesive on the Olivisc probably won't do the job.  I'm ivestigating using the Olivisc with another glue (after cleaning off the current adhesive with white spirit).  I'd wondered about using bellows tape but wanted to get close to the buff colour of the original if possible.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Steve_freereeder on March 14, 2016, 06:02:36 PM
Many thanks for your thoughts.  I agree that the adhesive on the Olivisc probably won't do the job.  I'm ivestigating using the Olivisc with another glue (after cleaning off the current adhesive with white spirit).  I'd wondered about using bellows tape but wanted to get close to the buff colour of the original if possible.

I presume you are so concerned about a colour match because the pallets are going to be visible (e.g. Cajun style one-row box). But if the pallets are going to be hidden behind a grille, why be so picky? I've seen old instruments which have various colours of pallet fixing material: white, brown, red, yellow...
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Rog on March 14, 2016, 10:15:00 PM
I bought a couple of metres of linen a while ago. I cut little squares and glue them onto pallets. The linen is also good as grille cloth. I use acrylic paint to alter it's colour as needed. Small strips of leather cut to size also work on pallets. Some pallets are actually held on with wax plus a patch on top. But if the whole thing is hidden by a grille and it's one of 'my' boxes, a blob of hot glue works v quickly and is easily removed as long as you don't put it in the pallet slot first. You can fix all your pallets with hot glue in about 3 minutes.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: tom f on March 15, 2016, 05:17:59 PM
Hi Steve.  Yes, its just me being pedantic.  If I can't get the Olivisc to work (and the initial trial seems OK) I'll use linen patches as Roger suggests.  I prefer this to hot glue which I can never seem to put on neatly.  Thanks for your thoughts.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Steve_freereeder on March 15, 2016, 06:02:24 PM
I'll use linen patches as Roger suggests. 

If you are going to use linen disks, here's a tip which restorer Martyn White passed on to me:

Soak your linen sheet in a dilute solution of PVA and water - about 20% PVA, 80% water - it's not too critical. Then hang up the linen to dry with as many creases flattened out as possible. The PVA stiffens the linen a bit like starch and makes it far easier to cut cleanly into squares or punch out disks with a large diameter leather punch. Then you can glue the disks/squares over the pallet arm ends using normal strength PVA or, less harshly, hide glue/fish glue.
Title: Re: Use of Olivisc to fix Pallets to Pallet Levers?
Post by: Rog on March 15, 2016, 07:46:41 PM
I'm probably a bit lazy with the linen. I just cut strips then squares with a scalpel/steel rule/cutting mat, then tweezer the patch into place on top of a blob of Bostik solvent free glue, and sort of tamp down the patch with the tweezers.
SimplePortal 2.3.5 © 2008-2012, SimplePortal