Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Henry Piper on May 13, 2016, 11:53:12 AM

Title: Removing Erica Bass Mechanism
Post by: Henry Piper on May 13, 2016, 11:53:12 AM
Simple question, ( I think !! )   Is it possible to remove the Bass mechanism from an Erica, without removing the buttons,???   I am currently trying, and It just doesn't seem to want to come out easily, and I don't wish to risk possibly bending the pallet arm thingy's !!
Many Thanks.
Title: Re: Removing Erica Bass Mechanism
Post by: Theo on May 13, 2016, 11:58:22 AM
Yes.
First release all the springs,
Second remove the screws holding the mechanism down.
Then with some wrangling it is possible to remove the buttons and get the whole thing out.  It is tight though.
Title: Re: Removing Erica Bass Mechanism
Post by: Henry Piper on May 13, 2016, 12:02:26 PM
Many thanks Theo. I forgot about releasing the springs !!! obvious really.
Title: Re: Removing Erica Bass Mechanism
Post by: Theo on May 13, 2016, 12:15:27 PM
Important to do that before removing the screws.  If you have already removed the screws you may have torn out some wood from the screw holes.  In that case you may need to plug the holes before replacing the screws.
Title: Re: Removing Erica Bass Mechanism
Post by: Henry Piper on May 13, 2016, 12:23:33 PM
All safely done Theo no problems, .....Its so easy when you know what your doing !!!  I will check screw holes when I replace, and plug if necessary.
SimplePortal 2.3.5 © 2008-2012, SimplePortal