Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Grape Ape on June 08, 2016, 02:38:42 PM
-
Is there a quick fix for a loose reed plate? I have a reed plate that keeps coming loose. I tried remelting the old wax, but it is just too brittle, and the reed blows loose again after a couple of squeezes. I have wax on order for a proper repair, but was planning on bringing the box camping with me this weekend and don't think my order will arrive on time. Any suggestions for a quick fix to keep the reed down for the weekend, with the promise to fix it properly in the near future?
-
Can't think of anything that's likely to be effective and risk free. I'd suggest that you say where you're going camping, someone may be able to bring the kit to wax it in!
Rob.
-
Yeah, except I will be the only box player within miles. I was wondering if there isn't any reason I couldn't just use a mild glue like elmers (kids glue) and then just peel it off when I can fix it proper...
-
You could try some candle wax as a temporary fix.
-
You could try some candle wax as a temporary fix.
Or even sealing wax if such a thing still exists???
If your reeds have pins, then perhaps in conjunction with blu-tac it might be a half decent temporary repair...
-
Drawing pin - if head doesn't interfere with reeds?
-
I'm sure Jeremy Clarkson or one of his side kicks said that if you can't fix it with Gaffa tape, then you aren't using enough Gaffa tape.
(Please don't try this at home)
-
Tried Candlewax. Seemed the logical choice, but I remember reading somewhere never to do it so it took Theo's ok to go with what I would have done in the first place if I hadn't read that somewhere. At first glance it looks the part and seems to be doing the trick. I'll let everyone know if it gets me through what should be a perilous weekend for both myself and the box.
-
Candle wax is not as strong as beeswax and rosin and has a lower melting point, so it may not las as well as the proper stuff. Better than a reed that falls out all the time!
-
Drawing pin - if head doesn't interfere with reeds?
Thumb tack to others. 8)
-
Or possibly biorán ordóige if it's a Cairdin? :||:
Reißzwecke if it's a Hohner? :||:
(...coat, etc.)
-
I know someone who actually uses a 50/50 mix of candle wax (paraffin wax) and beeswax when putting in reeds (not me...). This would make a perfectly adequate temporary repair.
-
I once used a beeswax candle to fix an old, non functional one row which I bought at a several day long festival. I found a vender selling beeswax candles and used the lit candle to supply molten wax, which i applied with the assistance of gravity in the desired locations. I remounted several reeds and sealed multiple leaks where missing trim nails had been. This worked well for me. I used a blunt knife heated By the same candle to form the wax in a few spots where I was unable to drip it. I had planned to add rosin, which I had in my fiddle case, but the beeswax wax worked well enough. A few hours later, I returned to the person who sold me this melodeon and enjoyed the look on his face when I played him a tune on the now useable box.