Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Henry Piper on June 22, 2016, 09:12:42 PM

Title: Hohner reeds.
Post by: Henry Piper on June 22, 2016, 09:12:42 PM
Whilst sorting out a set of Hohner D/G reeds today, I came across one that was stamped both "H" and "T", never seen this before, has anyone else ??,  and does anyone actually know what the letters signify ? !!.
Title: Re: Hohner reeds.
Post by: malcolmbebb on June 22, 2016, 09:22:57 PM
Apparently it's high voltage.  >:E
Title: Re: Hohner reeds.
Post by: Theo on June 22, 2016, 09:32:24 PM
The general view is that H is for Hohner and T is for Trosingen where the Hohner factory is/was located.  But i think this is just a reasonable guess.
Title: Re: Hohner reeds.
Post by: Henry Piper on June 22, 2016, 09:35:19 PM
Apparently it's high voltage.  >:E

Well I'm Shocked !!
Title: Re: Hohner reeds.
Post by: melodeon on June 22, 2016, 11:21:41 PM
Not HV  but HT

High Tension
Title: Re: Hohner reeds.
Post by: pgroff on June 23, 2016, 02:04:29 AM
I've read some confident statements that the "T" reeds were not produced until after World War 2, but I have reason to question that.

More than once I've seen "T" stamped zinc-plate reeds in accordions that seem to predate the war.

Most recently in a Globe Special D melodeon.  Now, it's possible those reeds were transplanted into that box but I have also noticed photos of another Globe Special with T-stamped zinc plate reeds. Both these boxes had the triad reeds mounted on a single plate which is unusual for Hohner melodeons.

I've also seen the "T" zinc plate reeds in a (seemingly early style of) Hohner pokerwork box, with stepped keyboard, pearl buttons, and wooden fretworked grille. This is a Bb/Eb box and the reeds seemed all-original.


Any thoughts on the possibility of some "T" stamped zinc reeds being produced in the 1930s or even earlier?

PG
Title: Re: Hohner reeds.
Post by: forrest on June 23, 2016, 07:42:30 AM
I have a single row Vienna style box with zinc plates, with the Gold Medal 1928 markings. The Basses are marked T and the trebles are all marked with a square. No reason to believe that they are not original.
Title: Re: Hohner reeds.
Post by: Theo on June 23, 2016, 08:24:11 AM
I agree Paul that there is not a clear history of the T and H markings.  I've seen both marks used on zinc and on aluminium plates and various combinations of zinc, Al, T and H used in the same box. And of course there are other differences in Hihner reeds that I know you are aware of such as the shape of the reed tongue and the style of rivet clenching.  I've also seen differences in the way the edges of the reed plate are finished - some very square, some slightly rounded.  I assume this latter feature is a result of the process used to cut the reed plate.  None of these fearltures seems to have a clear relation with the T and H markings! 
Title: Re: Hohner reeds.
Post by: Henry Piper on June 23, 2016, 09:25:17 AM
Since my mystery reed plate (Aluminium by the way ) has both "H" and "T" stamps this would imply that both stamps were used concurrently, so it cant relate to date, The "H" stamp is slightly Fainter than the "T", and offset to the Right of the other letter, and slightly crooked as though it was stamped on using a hand punch.
I just wondered if anyone had ever seen anything like this before. I assume its a Mistake but it would be interesting to know if there was any significance to it.
Title: Re: Hohner reeds.
Post by: John MacKenzie (Cugiok) on June 23, 2016, 09:51:37 AM
My Club II which was Bb/Eb, has both types of reeds, with one treble block being T and the other being H.
It is dated about 1935

Sir John
SimplePortal 2.3.5 © 2008-2012, SimplePortal