Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: blackdot1234 on June 25, 2009, 12:03:07 AM
-
can anyone tell me the name given to the steel used in making the reed tongue on accordion reeds as a friend of mine wants to see if it could be used to make uilleann pipe reeds for the drones and regulators and where could it be bought
-
try spring steel in coils as used in clock springs
I have a friend that makes kalimbas and uses this
However I seriously doubt it will work
Just a guess
-
Pressed sheet steel is generally available - thickness required would need to be determined. However, it's ferociously expensive stuff these days. It may be possible to cannibalise an old clock spring - have thought about it myself but not got that circular thingy in place (a roundtoit I think it's called). I seem to remember the report of an australian concertina builder famed for having used old clock springs as the reed tongues for his concertinas so I guess it would work.
AL
-
Try using the blue steel pallet binding straps.... free
-
Try using the blue steel pallet binding straps.... free
Hey Jeff, that is one good idea.
-
This subject reminds me of an archived newsreel from 1961 which starts with a view of a big coil of concertina reed steel in the Wheatstone factory in Islington. There was a reference to it on the dark side some while ago: http://www.britishpathe.com/record.php?id=417 (http://www.britishpathe.com/record.php?id=417). It's worth watching for the wonderful clipped accent of the narrator. And the background music.
-
Try using the blue steel pallet binding straps.... free
Dammit! I've been racking my brains on this issue for ages (re: my kitchen sink melodeon) and the answer is so simple!
Thanks Jeff - it's certainly worth a go.
AL