Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: dino.pafftti on September 27, 2016, 04:47:05 PM

Title: spoon bass
Post by: dino.pafftti on September 27, 2016, 04:47:05 PM
I would like information,, also feature a smaller spoon bass when the picture Hohner ???
hole 10mm,  I would like to put cherepashka air valve...might be found in the old ??
Title: Re: spoon bass
Post by: 911377brian on September 27, 2016, 05:16:13 PM
My Cherepashka has a little button rather than a spoon,Dino...
Title: Re: spoon bass
Post by: dino.pafftti on September 27, 2016, 06:36:07 PM
I have a new project, I would like to find a small spoon..
if I can not find, maybe I'll try to do it yourself,, my metal working tools are bad  :(
I do not know whether small spoons for sale ??
Title: Re: spoon bass
Post by: melodeon on September 27, 2016, 06:48:45 PM
Saxophones, clarinets.
Title: Re: spoon bass
Post by: rees on September 27, 2016, 07:36:36 PM
I would like to offer the option of spoon bass on my range of Wesson melodeons. I do not want to use the Hohner ones, serviceable as they are, they belong on Hohners.
Anyone out there interested in making suchlike?
Title: Re: spoon bass
Post by: playandteach on September 27, 2016, 11:58:54 PM
Closest thing on a clarinet might be the throat A key, but seems an expensive option. You'd have to wreck a clarinet per spoon. Win Win, you might say, as the rest of the clarinet is non-functioning without that key.
You could try one of the low recorder keys instead.
Title: Re: spoon bass
Post by: dino.pafftti on September 28, 2016, 06:27:55 AM
 today  email saxofon repair man, maybe he find an old valve  :|||:
Title: Re: spoon bass
Post by: squeezy on September 28, 2016, 09:47:20 AM
You can get spare clarinet keys from Dawkes without destroying a clarinet ...

do you mean something like this? (http://www.dawkes.co.uk/no.1+-+throat+a+key+series+1.dm?catno=wwc1001)

It doesn't see too expensive!
Title: Re: spoon bass
Post by: playandteach on September 28, 2016, 10:55:56 AM
That looks really cheap. You'd need the posts and rod too - and I'm not sure how ergonomic the key would be for that use - You might need to flatten the finger end. The spring is also designed to sit in a groove of very hard wood, where it slides smoothly - you might need to use a sliver of something underneath it to stop it catching on softer wood.
Title: Re: spoon bass
Post by: dino.pafftti on September 28, 2016, 11:19:04 AM
You can get spare clarinet keys from Dawkes without destroying a clarinet ...

do you mean something like this? (http://www.dawkes.co.uk/no.1+-+throat+a+key+series+1.dm?catno=wwc1001)

It doesn't see too expensive!

Seems good, but. which is the diameter of the valve ??
Title: Re: spoon bass
Post by: Steve_freereeder on September 28, 2016, 12:12:05 PM
You can get spare clarinet keys from Dawkes without destroying a clarinet ...

do you mean something like this? (http://www.dawkes.co.uk/no.1+-+throat+a+key+series+1.dm?catno=wwc1001)

It doesn't see too expensive!

Seems good, but. which is the diameter of the valve ??

On my Bb clarinet, the metal cup diameter is 10 mm and the pad diameter is 9 mm. Effectively, this would seal a maximum hole size of about 8 mm diameter.
These dimensions are for a typical clarinet throat 'A' key, as shown, which might be a bit small for an air vent on on a melodeon. I think you would be better off with a saxophone key. Perhaps a bit like this one (http://www.ebay.com/itm/Jupiter-Jas-769-767-Alto-Saxophone-Part-/272247662875?hash=item3f6339a91b:g:73wAAOSw5IJWePTJ), which I guess would be about 25 mm diameter.
Title: Re: spoon bass
Post by: dino.pafftti on September 28, 2016, 01:12:11 PM
Thanks
10 mm too small, hole is 10mm :(
I'm looking for Saxophone spoon,, something found in China, ebay   :-\

SimplePortal 2.3.5 © 2008-2012, SimplePortal