Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: boxer on October 17, 2016, 05:01:24 PM

Title: Hohner ID
Post by: boxer on October 17, 2016, 05:01:24 PM
Hi Hohner fans

I bought this little 21/8 key 2 voice Hohner recently.  About the size of a Pokerwork, but heavier, it was originally C/F when purchased in Germany by the vendor some year ago, and re-tuned B/C in Ireland.  Wooden keyboard, buttons yellowish and a bit porous like an old Club model's.

I've had to crop the picture heavily to get it uploaded but there should be enough there to go on.

Has anyone seen another like it?  I'd be grateful for any information about manufacture, name and/or model number

Thanks

Thanks
Title: Re: Hohner ID
Post by: malcolmbebb on October 17, 2016, 05:31:17 PM
I have one exactly like it. From remarks here, it is post war and "pre-Erica". Somebody did venture a model number, but I can't find it.
Pretty little box.

I have seen a couple of similar black ones on Ebay.de, but not many. The same decoration was used on a number of three row boxes, I believe.
I too will watch with interest.
Title: Re: Hohner ID
Post by: Mike-T on October 17, 2016, 05:47:19 PM
I have a 3 row identical in B/C/C#, again, told it's pre war, some call it pre tricord.

Mike.
Title: Re: Hohner ID
Post by: Theo on October 17, 2016, 06:37:35 PM
My favourite Hohner model, both in looks build quality and reed quality.  Most of the parts are interchangeable with more modern two row Hohners.
Title: Re: Hohner ID
Post by: boxer on October 17, 2016, 06:47:55 PM
Thanks ever so much chaps.  It's good to know my judgement in buying the box was probably sound.  The box is in very good condition apart from the (poorly retrofitted) felt stuffing inside the keyboard which is breaking up and messing up the action.  Not a big deal to sort out.
Title: Re: Hohner ID
Post by: boxer on October 17, 2016, 07:53:07 PM
Postscript

I've just taken the box to bits and discovered that what I though to be felt inside the keyboard was actually a block of soft foam plastic of the kind used to stuff furniture.  The block was a sort of raggedly rectilinear 3/4" x 2" x 9" - it almost filled the entire space inside the keyboard.

The box plays a lot better without it.
Title: Re: Hohner ID
Post by: Grape Ape on October 17, 2016, 11:10:26 PM
Postscript

I've just taken the box to bits and discovered that what I though to be felt inside the keyboard was actually a block of soft foam plastic of the kind used to stuff furniture.  The block was a sort of raggedly rectilinear 3/4" x 2" x 9" - it almost filled the entire space inside the keyboard.

The box plays a lot better without it.

Maybe a poor attempt at limiting button travel?
Title: Re: Hohner ID
Post by: Grape Ape on October 17, 2016, 11:11:55 PM
My favourite Hohner model, both in looks build quality and reed quality. 

I can't find the post, but I am pretty sure you said the exact same thing verbatim about the Hohner Club I....
Title: Re: Hohner ID
Post by: Theo on October 17, 2016, 11:20:00 PM
I'm very fickle.
SimplePortal 2.3.5 © 2008-2012, SimplePortal