Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Schnorbitz on November 23, 2016, 06:58:01 AM

Title: Changing a box from wet to dry
Post by: Schnorbitz on November 23, 2016, 06:58:01 AM
I have first refusal on an old hohner. Not sure of the condition until I see it, but as it is free it seems wrong not to go and have a look. One question, I know it's playable and apparently in tune (ish), however it is tuned to musette and probably way too wet for me. In terms of getting it tuned drier how much latitude is there normally with a really wet box?

(This is not a job I would be looking to do myself)
Title: Re: Changing a box from wet to dry
Post by: Lester on November 23, 2016, 08:04:03 AM
A fettler can change it from wet as a really wet thing to dry as a bone with little problem.
Title: Re: Changing a box from wet to dry
Post by: Theo on November 23, 2016, 09:06:10 AM
If it's a gift then take it and find out about it later. Almost any old Hohner will have some use, even if it is just for parts.
Title: Re: Changing a box from wet to dry
Post by: Schnorbitz on November 23, 2016, 09:11:08 AM
Thanks gents, I hoped that would be the case. Hadn't thought of the parts aspect either. Your advice, as always, is appreciated.
SimplePortal 2.3.5 © 2008-2012, SimplePortal