Melodeon.net Forums
Discussions => News and Events => Topic started by: Theo on November 10, 2007, 12:33:24 PM
-
One week course in Stowmarket, Suffolk, UK organised by EATMT and run by Emmanuel Pariselle. Each participant builds a one-row 4-stop which is theirs to keep at the end of the week.
Details from http://www.eatmt.org.uk/ (http://www.eatmt.org.uk/)
-
Had my name down since the last one and have re-applied now it has been announced.
-
Hope to see you there. I'll be acting as "technical assistant" again. 8)
-
Hope to see you there. I'll be acting as "technical assistant" again. 8)
Hi Theo,
I'm curious what the cost of this is. You can email me off-list. I've corresponded with Emmanuel before about it and he said he would offer one here if I organized it.
-Andy
-
This years course cost a bit over £900, not including accommodation or food. Not sure of the exact cost but it was round about there. It does include tuition, access to machinery, and all the parts and materials including Binci a mano reeds. So you end the week with a very nice box and a lot of skill and knowledge too. Participants are expected to bring along a very simple toolkit: screwdrivers, pliers, knife, cutting board, straightedge, apron etc. I know when Katie Howson was organising it there were 8 places, and two or three times that many people applied. I wouldn't be surprised if the all places were already booked for next year's.
-
Andy,
If you can get this organized I would be interested....
-
Andy,
If you can get this organized I would be interested....
Good, I've been collecting names of those who are interested in an effort to see whether it is feasible. There are two possibilities: building 2.5 row boxes with Emmanuel Pariselle (that's the workshop he gave pre-St-Chartier a few years back) or building one-row boxes with a North American builder (to be determined). Anyhow, these are ideas that I had, and I think that I can get us access to a decent facility. Unfortunately, in the US liability becomes an issue, which might end up making it prohibitively expensive. If there was a way to begin the project with all the machining completed, that would be a different matter.
-Andy
-
When Emanuel did the course in England this year it was for one-row boxes.
Picture gallery here (http://www.eatmt.org.uk/melodeon_making_2007.htm)
-
When Emanuel did the course in England this year it was for one-row boxes.
Hi Theo,
Thanks, I knew that the course in England was for one-rows, but I think that if there is to be a one-row course in North America, it would make sense to find a North American builder to teach the course. What I'd love to do it bring Emmanuel over to build 2.5 row boxes, since there is no one in NA who builds boxes in that configuration, and he did build them in the course that he taught at St-Chartier -- he sent me some pictures from the course, and the boxes looked amazing.
Many thanks for the link to the photos -- it looks like it was a lot of fun, and the boxes look very nice.
-Andy
-
Anyone going to this years course?
-
Anyone going to this years course?
I missed out again :(, but probably next time. Carlos Fandango, late of this forum, was due to be going but I've not seen him recently so don't know if he will definitely be there.
-
Yes - I managed to get on this year (sorry Lester!). Carl is definitely on it too.
-
Anyone going to this years course?
I'll be there too
-
Emmanuel was telling me that he is going to Canada in the summer of 2009.
Not sure of actually where. He's in Norway in February and Belgium in July.
Busy man.
I'm going to the one in Belgium, which is for a 2 1/2 row.