Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: bearwhisperer on September 21, 2017, 04:47:22 AM
-
Does anyone know what each of the four or the bass stops on a Castagnari 1914 do?
Thanks!
G.
-
perhaps I should have posted this in "makes and models"? sorry. I'd still like to know if anyone can help.
-
Like all the Castagnaris with 4 push buttons on the left hand ... they're couplers rather than stops ... each one gives a different permutations of bass and chord settings which are (I can't remember the order)
1. Low bass reed in + thirds in on chords
2. Low bass reed in + thirdless chords
3. Low bass reed out + thirdless chords
4. Low bass reed out + thirds in on chords
-
Like all the Castagnaris with 4 push buttons on the left hand ... they're couplers rather than stops ... each one gives a different permutations of bass and chord settings which are (I can't remember the order)
1. Low bass reed in + thirds in on chords
2. Low bass reed in + thirdless chords
3. Low bass reed out + thirdless chords
4. Low bass reed out + thirds in on chords
Here's the correct order, numbered from the 'floor end'.
Top end
4. Low bass reed out + thirdless chords
3. Low bass reed in + thirdless chords
2. Low bass reed out + thirds in on chords
1. Low bass reed in + thirds in on chords
Floor end
This is standard Castagnari set-up and applies to other models with the piston-type switches, e.g. Mory, Handry, Trilly, etc.
-
Thanks for the replies folks, I've been out of town for a few days.