Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: John MacKenzie (Cugiok) on March 15, 2018, 01:20:45 PM

Title: Lumpy wax
Post by: John MacKenzie (Cugiok) on March 15, 2018, 01:20:45 PM
Well what fun I didn't have, during my first attempt at rewaxing red plates onto a reed block. I used the paintbrush method as per the short video on the CGM web page. The brush stuck to the edge of the reed plate immediately it touched. With a bit of persuasion and a bit of practice, I got better at it, but now I have the aforementioned "Lumpy wax" problem.
I have ordered a variable heat soldering iron, as a means of being able to smooth it off. Is there any better way to do it? and.....While I'm at it, any waxing hints would be gratefully received.
It looks so easy in the video  >:E


Sir John
Title: Re: Lumpy wax
Post by: Theo on March 15, 2018, 01:34:34 PM
I’m surprised that the paintbrush method works at all, but maybe the wax needs to be hotter, which brings its own problems.  If you re-do the waxing with a soldering iron I would recommend removing the brushed on wax, and starting afresh with new wax.  I find it very difficult to get a nice smooth neat finish when re-melting wax in situ.
Title: Re: Lumpy wax
Post by: boxcall on March 15, 2018, 05:08:12 PM
I found using the paint brush method that the amount of wax left was thin and that the brush got gummed up quickly. Also that keeping the wax and brush hot enough was key, which I didn't have the right set up to do that. I made a copper spoon on my last job which worked good on the bass reeds with big spaces in between the reeds and also good for the treble bottom and top but a little tough doing in between the sides where the space is smaller. I was finding I wasn't moving fast enough at times and getting to much wax which would then have to be scrapped away. I just melted the wax in the spoon itself, a wax pot would have been better.

This makers has a pretty cool tool for applying wax you can see it here at about 1:50 in.

Has any one played one of His boxes? He makes some pretty interesting grills and the rest of the construction work seems good.

Edit to add the link: https://m.youtube.com/watch?v=YTGUyI-me1s&time_continue=151&ebc=ANyPxKq0chQogU9lcj-polHjcxsWXZ8Qu869wtETXl22UgQzNy0QV0Ed8x75OwRg4wNWiMAN5dfcYbUONJec1yz4gWfLYeXlYw
Title: Re: Lumpy wax
Post by: John MacKenzie (Cugiok) on March 15, 2018, 06:01:29 PM
Diatonix has a pretty cool looking wax spoon, on a You Tube video, but I can't see one to buy anywhere.


SJ
Title: Re: Lumpy wax
Post by: boxcall on March 15, 2018, 06:31:12 PM
I've seen that and based the one I made on it. The copper is good for holding the heat and easy to solder together, seems like frequent trips back to the pot is needed though. I found by the time I was almost finished with the amount that was in the spoon it was cooling down and not flowing as good.
Like I said a pot full of wax would have been better and more controllable as to the amount that was in the spoon. I tended to have to much since I was melting it in the spoon.
I noticed Diatonix would dip it then dump a little out so as not to have this problem.
Title: Re: Lumpy wax
Post by: Winston Smith on March 15, 2018, 06:52:40 PM
Watching these experts waxing is a bit daunting, I find. However, I think it's very much a case of them being confident in what they are doing which makes it look so easy. I'm sure that with a bit of practice that confidence would soon come. (But I'll be sticking to my trusty soldering iron for the time being.)
Title: Re: Lumpy wax
Post by: boxcall on March 15, 2018, 07:52:44 PM
Down side to the soldering iron is the smoke it creates which is bad to breathe ( I was told) , I'm not sure if the vapor from warming the wax is bad also or just the smoke?
Any one care to answer?

My guess is that as long as it's not smoking that maybe its not as bad and therefore I would think wax pot and spoon would be better if you were doing a lot of it.
If it is just as bad then this is a load of **** (:)
Title: Re: Lumpy wax
Post by: Lester on March 15, 2018, 08:09:52 PM
Down side to the soldering iron is the smoke it creates which is bad to breathe ( I was told) , I'm not sure if the vapor from warming the wax is bad also or just the smoke?
Any one care to answer?

My guess is that as long as it's not smoking that maybe its not as bad and therefore I would think wax pot and spoon would be better if you were doing a lot of it.
If it is just as bad then this is a load of **** (:)

Yes the smoke is bad for you, I wear vapour mask  (https://www.axminster.co.uk/3m-4000-series-gas-vapour-and-particulate-respirators-ax839414)whenever I am waxing but I am an asthmatic. If there is a lot of smoke it's because the iron is too hot. I run mine through a light dimmer switch to enable me to regulate the temperature.
Title: Re: Lumpy wax
Post by: Winston Smith on March 15, 2018, 08:13:09 PM
I think it is the smoke as opposed to whatever else, but I'm not a regular waxer. I was a regular smoker for over 40 years, so the old bellows are probably about shot, anyway!
Title: Re: Lumpy wax
Post by: boxcall on March 15, 2018, 08:26:19 PM
Right the smoke then, I asked this question in my recording king repair thread but wasn't clear on the answer.
I did touch up with a soldering iron and had a cloth on hand to wipe off any wax that remained on the iron, seemed like that was when it smoked the most.

Title: Re: Lumpy wax
Post by: tirpous on March 15, 2018, 09:40:23 PM
 
Quote
I did touch up with a soldering iron and had a cloth on hand to wipe off any wax that remained on the iron, seemed like that was when it smoked the most.

Matches my experience.  I use a paper towel to wipe wax from the iron (and no, it does not burn).
Title: Re: Lumpy wax
Post by: malcolmbebb on March 15, 2018, 11:00:28 PM
If there is a lot of smoke it's because the iron is too hot. I run mine through a light dimmer switch to enable me to regulate the temperature.

What he said.
Title: Re: Lumpy wax
Post by: Theo on March 15, 2018, 11:30:30 PM
Any fumes from hot wax, even when there is no visible smoke, is a potential hazard.  If you are  only waxing occasionally the risk of harm will be less.
Title: Re: Lumpy wax
Post by: Rog on March 15, 2018, 11:40:01 PM
For heating wax this is 'the business'
http://www.carinidena.it/MS5ECOMMERCE60/jsp/eco_cc_home_bs_portlet.jsp?p=dettarti&codarti=12151

And with this spoon.
http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Waxing_Tools.html#0

And for small jobs and tidying up etc....a soldering iron with variable heat setting (they are very cheap).


Title: Re: Lumpy wax
Post by: boxcall on March 16, 2018, 12:44:24 AM
Any fumes from hot wax, even when there is no visible smoke, is a potential hazard.  If you are  only waxing occasionally the risk of harm will be less.
Thanks Theo,
I got that now. You probably said something similar before but I wasn't getting it.
Title: Re: Lumpy wax
Post by: John MacKenzie (Cugiok) on March 16, 2018, 11:03:17 AM
Well the new temperature controlled soldering iron arrived this morning, and I'm very happy with the resultant tidy up of my crap waxing.

SJ

Found this site for Diatonix type wax spoon

https://www.akkordeonshop24.de/wachsloeffel.html
Title: Re: Lumpy wax
Post by: Rog on March 17, 2018, 08:15:45 AM
Well the new temperature controlled soldering iron arrived this morning, and I'm very happy with the resultant tidy up of my crap waxing.

SJ

Found this site for Diatonix type wax spoon

https://www.akkordeonshop24.de/wachsloeffel.html

That spoon is a very cool tool (:)
Title: Re: Lumpy wax
Post by: John MacKenzie (Cugiok) on March 22, 2018, 03:26:47 PM
It arrived today. Takes a bit of getting used to though. You need to keep it moving, and you need to learn when to tip it back to stop the flow. All in all, a grand tool.

https://www.youtube.com/watch?v=yjGaLwqrtOs

Sir John
Title: Re: Lumpy wax
Post by: boxcall on March 22, 2018, 05:10:13 PM
Nice!
Yes it does take a little time to get the hang of it, I found the hard part was the first pass at the bottom setting them in place without knocking them out of place.
Here's a picture of my homemade job, nothing fancy. It didn't cost a thing since I had stuff lying around to make it.
Definitely a tool to have.

Title: Re: Lumpy wax
Post by: mselic on August 19, 2018, 05:11:21 AM
I've used the paintbrush method, and was surprised at how well it actually worked. Paramount to success was getting the wax hot enough, and then to keep the brush moving while applying. It would take a few passes with the brush (dipped back into the pot each time) to fully wax a reed in place.  It wouldn't look like much wax was there, but I was amazed at how difficult it then was to remove a reedplate from the fresh wax; plenty there to do the trick!  If the brush ever got gummed up, a quick dip back into the hot wax fixed that problem.

Doing the two inner-facing reedblocks on a HA114 took a very, very steady hand and thin brush.  I ordered a waxing spoon a month ago, but it has yet to arrive in the mail, so I've made do with the brushes...
Title: Re: Lumpy wax
Post by: Graham Spencer on August 19, 2018, 07:50:42 AM
I've used the paintbrush method too- it's very hard on paintbrushes!  It does work, though I can't get the slick finish that Charlie Marshall achieves with this technique. It does get easier and neater with practice, though.  I now generally use a tjanting (on the advice of my wife, who used to teach textiles) - you can get them with a variety of spout diameters.

Graham
Title: Re: Lumpy wax
Post by: mselic on August 19, 2018, 02:09:16 PM
I've used the paintbrush method too- it's very hard on paintbrushes!  It does work, though I can't get the slick finish that Charlie Marshall achieves with this technique. It does get easier and neater with practice, though.  I now generally use a tjanting (on the advice of my wife, who used to teach textiles) - you can get them with a variety of spout diameters.

Graham

I’d never heard of a tjanting tool before, but that looks perfect! Just wondering, though - how does one keep the ‘spout’ from getting gummed up and blocked with wax?
Title: Re: Lumpy wax
Post by: Graham Spencer on August 19, 2018, 03:32:35 PM
I've used the paintbrush method too- it's very hard on paintbrushes!  It does work, though I can't get the slick finish that Charlie Marshall achieves with this technique. It does get easier and neater with practice, though.  I now generally use a tjanting (on the advice of my wife, who used to teach textiles) - you can get them with a variety of spout diameters.

Graham

I’d never heard of a tjanting tool before, but that looks perfect! Just wondering, though - how does one keep the ‘spout’ from getting gummed up and blocked with wax?
Many of them come with a steel "plug"; in any case, any solidified wax in the spout soon melts when the tool is up to temperature.
Title: Re: Lumpy wax
Post by: Ebor_fiddler on August 19, 2018, 08:39:38 PM
I've only done this job once, but it was successful and the reeds are still in situ and don't leak air in the wrong places. When I had finished making the wax mix, I let it set wide and thin. When set, I sliced off pieces the shape and size of a very thin matchstick. I then took one of these Matchmakers in hand and applied my modelling soldering iron near enough to melt the wax into place, but without actually touching it. I can hear the horrified gasps of more experienced workers before I post, but it did the job and looked reasonably tidily finished.

Chris B.
Title: Re: Lumpy wax
Post by: Frank Pallister on August 19, 2018, 09:46:11 PM
my experience a bit like chris , i put a ceramic tile in a freezer bag and pour my molten reed wax to form a smooth flat thin  disc on the outside of bag (dont want it sticking to tile )  ,put in freezer to cool then remove bag from tile and you can slice matchstick pieces to size with scalpel or cut longer lengths to feed into soldering iron  on reed edge (like welding rod !)   
SimplePortal 2.3.5 © 2008-2012, SimplePortal