Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: melodona on August 18, 2009, 03:08:15 PM

Title: Looking for a HELIKON REED
Post by: melodona on August 18, 2009, 03:08:15 PM
hello
I'm looking to replace a broken tongue from a double Helikon reed (the lowest one). It's a B and it's 7cm long (the loose part of it) and 8mm large (must be 8.5cm long with the bass too but I don't have it with me anymore to check).
The accordion is a Sonola.

I'm in Montreal and my part supplier doesn't have any. He tells me they're very hard to find in North America.
I'm really hoping to find a tongue from another accordion that's being used for parts.

Anyone has a suggestion or knows someone who might have what I need?
(I have tones of pictures if that can help)

thank you

good day

Melodona
Title: Re: Looking for an ELIKON REED
Post by: HallelujahAl on August 18, 2009, 03:12:18 PM
Hi - can I suggest that you contact Johann Pascher of this forum directly (I don't think he visits that often). I had exactly the same problem with one of my Helikon Bass Reeds in my Heligonka and he very kindly  made me a new reed and fitted it to the original reed plate. He is in Austria - but post worked fine and within a couple of weeks it was sorted.
AL
Title: Re: Looking for a HELIKON REED
Post by: melodona on August 18, 2009, 04:49:29 PM
thanks Al
I'll keep that in mind
but since my client is a poor student (and he's paying the bill)
before having it made and shipped
I'd like to try and find a replacement closer by if possible

hopefully we'll get lucky

Melodona
Title: Re: Looking for a HELIKON REED
Post by: Theo on August 18, 2009, 05:16:47 PM
Nice big reeds like that are relatively easy to make.   You do need a suitable piece of spring steel, and a good file.  The reed is held in place by screws, so no old rivet to remove and replace.

Many accordion repairers will be able to replace the reed for you.  Some piano and chromatic accordions also use helikon reeds.
Title: Re: Looking for a HELIKON REED
Post by: HallelujahAl on August 18, 2009, 06:25:35 PM
Yes understand - but Johann is also in contact with loads of guys Stateside who may be able to help you - as to the cost well, I got it for nothing ;D
AL
Title: Re: Looking for a HELIKON REED
Post by: melodona on August 18, 2009, 07:35:37 PM
Al devil you! :o
what's your secret?!
I've looked on your blog and I need the exact same model
8.5cm from tongue to toe with the 2 screws
(even the big bassa profunda ones my supplier has are not that big)

I should try Johann then...
thanks again
I'm loving this forum already!

Melodona
Title: Re: Looking for a HELIKON REED
Post by: HallelujahAl on August 18, 2009, 10:01:13 PM
Good luck - I found Johann most helpful!
AL ;D
SimplePortal 2.3.5 © 2008-2012, SimplePortal