Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: stevejay on August 21, 2009, 12:31:05 AM

Title: Bellows Tape?
Post by: stevejay on August 21, 2009, 12:31:05 AM
Is there an easily available tape to recommend for patching reinforcing the bellows? I'd prefer something I could get in a drugstore or hardware store than "special" for the job.

I noticed a bit of abrasion on the bottom, thought I'd catch it now..

Thanks 
Title: Re: Bellows Tape?
Post by: rees on August 21, 2009, 12:36:32 AM
Get the proper stuff from Charlie Marshall in Scotland. His details on the front page. Click on Website Home - Shops and Repairers CGM Musical Services. Next day delivery.  :Ph
Title: Re: Bellows Tape?
Post by: HallelujahAl on August 21, 2009, 09:05:51 AM
Yes - can't recommend Charlie Marshall highly enough and the proper stuff is cheap enough. Much better than Duck Tape and other bowelderised measures I've seen.
However I happen to know that Charlie is away till about the middle of next week - but yes usually next day service is standard.
AL
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 21, 2009, 11:19:59 AM
Many of us who are addicted to wearing a belt on our jeans get abrasion to the lower back part of the bellows.  New tape will only wear through like the original, so I put PVC insulating tape over the affected area as it resists abrasion rather well.  It is never seen when playing as it is against the body.  I wouldn't, however, recommend taking the old tape off first, as it forms the seal.

Rob.
Title: Re: Bellows Tape?
Post by: rees on August 21, 2009, 11:42:36 AM
Many of us who are addicted to wearing a belt on our jeans get abrasion to the lower back

Pull your pants up....... ;D
Title: Re: Bellows Tape?
Post by: Theo on August 21, 2009, 11:45:41 AM
... New tape will only wear through like the original, ...

If we are talking Hohner bellows here then new Italian tape will wear much better than the original flimsy gold paper on Pokerworks or Ericas, and better than pvc insulation tape too. 
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 21, 2009, 11:49:00 AM
Sorry, guys!

I only meant that changing like for like will only start the process over.  I use insulting tape as a sacrificial layer, but then I fit sacrificial anodes to my boat too.

Rob.
Title: Re: Bellows Tape?
Post by: rees on August 21, 2009, 01:39:24 PM
In my early days with Edward the Second we had sacrificial balalaikas - smashed one at every gig.
We had an idea that when we reached stadium status we could charter an Aeroflot cargo plane loaded with balalaikas and blow it out of the sky!
Title: Re: Bellows Tape?
Post by: HallelujahAl on August 21, 2009, 02:25:41 PM
Quote
We had an idea that when we reached stadium status we could charter an Aeroflot cargo plane loaded with balalaikas and blow it out of the sky!

Detente didn't stand a chance with you lot did it?
AL
Title: Re: Bellows Tape?
Post by: rees on August 21, 2009, 03:19:54 PM
Perestroika, glasnost - my bottom!
Title: Re: Bellows Tape?
Post by: Accordion Dave on August 21, 2009, 03:20:14 PM
Wear the belt buckle on the side rather than the front. 
Title: Re: Bellows Tape?
Post by: Quebecois on August 21, 2009, 04:11:49 PM
You can also install one of those "bellows guards", easier to install than replacing bellows tape!
Title: Re: Bellows Tape?
Post by: Bryson on August 21, 2009, 10:18:38 PM
What is a bellows guard? ..
Title: Re: Bellows Tape?
Post by: RGF on August 22, 2009, 04:51:24 AM
Also known as a "backpad", it's typically a thin sheet of foam sandwiched between two layers of fabric. Snapped on the the right side of the instrument, behind the keyboard, and extending left across the back side of the bellows.  Keeps your shirt buttons out of the folds, keeps the bellows tape from abrading on your clothing, etc. I have one on each and every PA and button box that I own.  Are these commonly seen in the melodeon world, or not?

It can sometimes be frustrating to find one in the size you want, with snaps installed in the correct position. There is a fellow in Canada who will make them for you in any custom size, and will ship them with the snaps not installed, so you can place them according to your wishes when you've actually seen the pad against the back of the instrument. Custom size the same price as off-the-shelf, $17.95.  They bcome with self adhesive snaps for the backside of the box, or you can use the more traditional screw type if you prefer. Here's the link: http://www.greataccordions.com/

Bob
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 25, 2009, 01:38:40 AM
Wear the belt buckle on the side rather than the front. 

Have you ever tried that - it is the source of much lavatorial humour.  Much like forgetting you're wearing braces with your morris kit and your trousers bouncing back up like a yo-yo!
Title: Re: Bellows Tape?
Post by: Owen Woods on August 25, 2009, 08:04:11 PM
Sorry, guys!

I only meant that changing like for like will only start the process over.  I use insulting tape as a sacrificial layer, but then I fit sacrificial anodes to my boat too.

Rob.

Sail or motor?
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 26, 2009, 09:31:51 PM
Sail, of course!  I have a Weston 8500: bermudan sloop, 27'9" LOA.  Very 70's in design, fin and skeg with a typical IOR inspired rig, large genoa and skinny main.  Kept on the Hamble, where I can get nicely tangled in a fore and aft mooring.

Must take the Hohner down soon and annoy the neighbours with shanties and hornpipes!

Rob.
Title: Re: Bellows Tape?
Post by: triskel on August 27, 2009, 02:14:50 AM
(http://i17.photobucket.com/albums/b66/StephenChambers/Smileys/threadjacked.gif)

... I fit sacrificial anodes to my boat too.

Sail or motor?

Sail, of course!

Sounds like you two might have enjoyed my weekend then, at Cruinniú na mBád (the gathering of the boats) in Kinvara, Co. Galway. It's a festival of traditional Galway Bay boats, especially the Galway hookers that used to carry turf to Kinvara, across the Bay from Connemara. Here's a picture I took of a couple of them on Sunday;

(http://i17.photobucket.com/albums/b66/StephenChambers/P1030769.jpg)

and a video clip of some in action: Galway hookers at Cruinniú na mBád 2009 (http://"http://www.youtube.com/watch?v=3-Ap6RoObc0")

There's always traditional music/singing at it too, and sean nos dancing, even (to come back to topic) melodeon playing!  :||:
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 27, 2009, 04:37:28 PM
There was a recent article on the Galway boats in PBO.  I would love to see them one day, but I have a problem with modern traditional Irish tunes.  The only tunes I can follow go back to the days when you couldn't distinguish English from Irish and no-one recognises them as being Irish, e.g. O'Connell's March.

Rob.
Title: Re: Bellows Tape?
Post by: Stiamh on August 27, 2009, 04:52:19 PM
Great series of video clips here: De Dannan (c. 1980) on a (sail) boat (http://www.youtube.com/watch?v=aUnSUfw0WGc) - isn't that a Galway hooker? (On topic - features Jackie D. on a real old grey Paolo.)
Title: Re: Bellows Tape?
Post by: triskel on August 28, 2009, 03:12:09 AM
Great series of video clips here: De Dannan (c. 1980) on a (sail) boat (http://www.youtube.com/watch?v=aUnSUfw0WGc) - isn't that a Galway hooker?

Yep, that's An Tonai, one of the best-known hookers. I believe she was being used as a ferry out to the Aran Islands in the early '80s.

Quote
(On topic - features Jackie D. on a real old grey Paolo.)

That one is a particularly good D/D# box. Charlie Harris has it for a long time now and plays it a lot, like in these clips: Charlie Harris (http://www.youtube.com/watch?v=vEoT4x6OkKc); Charlie Harris, Des Mulkere (http://www.youtube.com/watch?v=pFOQOSfGMhQ); Geraldine & Eamonn Cotter, Maeve Donnelly & Charlie Harris (http://www.youtube.com/watch?v=yYeNxZlqeII)
Title: Re: Bellows Tape?
Post by: boxlad on August 30, 2009, 12:39:06 AM
Quote
What is a bellows guard?

I think this is the guy who invented them..  :D

Title: Re: Bellows Tape?
Post by: triskel on August 30, 2009, 02:40:30 AM
Quote
What is a bellows guard?

I think this is the guy who invented them..  :D

Ouch!  :o

If he didn't, he should have...  ::)
Title: Re: Bellows Tape?
Post by: Owen Woods on August 30, 2009, 08:20:06 PM
Sail, of course!  I have a Weston 8500: bermudan sloop, 27'9" LOA.  Very 70's in design, fin and skeg with a typical IOR inspired rig, large genoa and skinny main.  Kept on the Hamble, where I can get nicely tangled in a fore and aft mooring.

Must take the Hohner down soon and annoy the neighbours with shanties and hornpipes!

Rob.

Glad to hear it :P We have a Trapper TS240, lovely little thing, fractional rigged, drop keel hydraulically lifted. Everything is broken, we are steadily working our way through it and fixing what we can in true PBO fashion :D We keep it on the Blackwater. Only problem is a heavy rudder, but we've designed and had fabricated an ally frame to hang it off that we hope will make it more balanced.

Then again, most of my sailing this past year has been in my university club's Sigma 38, which is a fantastic boat to sail.
Title: Re: Bellows Tape?
Post by: Rob2Hook on August 30, 2009, 10:28:58 PM
A TS240?  I would think twice about trying to race you!  I used to sail on a friend's Trapper 500 - incredibly good in a bit of wind, but the spade rudder had hit something and the shaft was bent, so it was completely unbalanced.  Steering at anything over four knots was a two-handed affair.

I bought Mojo in west Mersea, but unfortunately couldn't find a locl mooring, my original plan for the first season, so as to cruise the area.  I'm told there are a number of hotspots where the melodeon and sailing go together - pub sessions and the like.  I'd get lynched if I tried playing in a Hamble pub!

Rob.
Title: Re: Bellows Tape?
Post by: Ebor_fiddler on September 01, 2009, 10:21:22 PM
I'm looking for a cheap 20' river cruiser, about 30 miles from York, to practice my melodeon playing  :-* . Does it count as not being thread drift if I claim that I intend to store Bellows Tape on it as well?  (:)
Title: Re: Bellows Tape?
Post by: Owen Woods on September 22, 2009, 01:36:13 PM
A TS240?  I would think twice about trying to race you!  I used to sail on a friend's Trapper 500 - incredibly good in a bit of wind, but the spade rudder had hit something and the shaft was bent, so it was completely unbalanced.  Steering at anything over four knots was a two-handed affair.

I bought Mojo in west Mersea, but unfortunately couldn't find a locl mooring, my original plan for the first season, so as to cruise the area.  I'm told there are a number of hotspots where the melodeon and sailing go together - pub sessions and the like.  I'd get lynched if I tried playing in a Hamble pub!

Rob.

Yeah, even with the problems that we have we easily outstrip anything of comparable size. Rudder is unbalanced, it's a stupidly big thing, I hear that our new frame has improved things quite a bit. I'll be sailing it on Sunday with any luck, for the first time this year (due to me being at university or on holiday for most of the past 9 months)
Title: Re: Bellows Tape?
Post by: Rob2Hook on September 22, 2009, 05:11:19 PM
I seem to remember the TS240 has a lifting blade rudder in a frame.  Reports were that it paid to insert wedges to tilt the blade forward at the tip, so as to give some balance.  I think I've found a cost effective way of getting the boat onto a landing stage next to car park so as to get a box on board - I've always been a little nervous of taking one in the rubber dinghy!

Rob.
Title: Re: Bellows Tape?
Post by: Owen Woods on September 22, 2009, 07:04:21 PM
I seem to remember the TS240 has a lifting blade rudder in a frame.  Reports were that it paid to insert wedges to tilt the blade forward at the tip, so as to give some balance.  I think I've found a cost effective way of getting the boat onto a landing stage next to car park so as to get a box on board - I've always been a little nervous of taking one in the rubber dinghy!

Rob.

Yeah, we tried that, but it didn't seem to make much difference. Then the chain for our mooring snapped and the thing drifted, the rudder worked loose and plunged down, got stuck in the mud, the tide turned and the rudder case was ripped to shreds... so we thought that we may as well redesign it.

And I've never yet dared take a box on board. Maybe when I can afford to replace mine or afford to buy a box that I don't mind too much about then I will think about it :P
Title: Re: Bellows Tape?
Post by: AirTime on September 04, 2011, 04:34:06 PM
I thought I would tack my question onto this thread, even though it has nothing to do with boats!  ;)

I recently bought 2 Pokerworks - a '50's that has the black tape & an '80's with the gold tape. The newer box was in perfect shape when I bought it. In a very short time I started wearing through that pathetic gold bellows tape. Last night, after a longish session, I was alarmed to see I had worn completely through the tape & was starting to wear through the bellows cardboard itself.

First, I have to ask myself why on earth would Hohner ever have specified a material so eminently unsuited for it's purpose as that gold stuff?!  >:(  Second, what is the best strategy for dealing with this problem? I certainly don't want to have to replace all the bellows tape - I was thinking of just patching the small worn-through areas with some tougher tape - possibly electrical tape, duck tape or that easy-to-remove painters tape.  Any opinions on this?

Incidentally, I am not wearing a belt while playing, but I found that even slight rubbing against the fabric of my shirt or the crotch of my trousers was enough to wear the gold tape. I have started playing using double straps & I think it's possible that there is now some rubbing against the strap leather ...
Title: Re: Bellows Tape?
Post by: Lester on September 04, 2011, 04:47:43 PM
First, I have to ask myself why on earth would Hohner ever have specified a material so eminently unsuited for it's purpose as that gold stuff?!  >:( 

Cost at a guess but you are right it is buddy useless

Quote
Second, what is the best strategy for dealing with this problem? I certainly don't want to have to replace all the bellows tape - I was thinking of just patching the small worn-through areas with some tougher tape - possibly electrical tape, duck tape or that easy-to-remove painters tape.  Any opinions on this?

I would use proper bellows tape  (http://www.cgmmusical.co.uk/CGM_Musical_Services/Bellows_Tape.html#4)rather than any of your suggestions but just patching is an option. I use fast grab PVA glue (http://www.axminster.co.uk/polyten-pva-glue-prod22032/?pricing=inc) to attach the tape then place greaseproof paper between the folds and clamp the whole lot up tight til its set.

https://picasaweb.google.com/109058536503428722881/BellowsTaping (https://picasaweb.google.com/109058536503428722881/BellowsTaping)
Title: Re: Bellows Tape?
Post by: Pete Dunk on September 04, 2011, 05:06:21 PM
I agree with Lester, none of the tapes you mention are suitable and doing just the back folds won't take that long or cost too much. If you sit when playing keep an eye on the bottom folds too.
Title: Re: Bellows Tape?
Post by: Beverly Fizzell on September 04, 2011, 06:14:50 PM
I have that very same button box!  Not much wear so I think it wasn't played much.
Title: Re: Bellows Tape?
Post by: Michael B on September 04, 2011, 06:16:39 PM
I might be alittle late on this one, I just joined the Forum.
I used, on the old wood Erica that I've restored, cloth bookbinding tape.
Title: Re: Bellows Tape?
Post by: AirTime on September 04, 2011, 06:52:42 PM
Here's the thing: other than the small worn areas, the bellows tape is entirely pristine. The only way to match the existing tape would be to use the same hopeless stuff, which would mean I would have to re-do it in short order. If I use something different, it isn't going to match what's there anyway. So, short of re-doing the entire bellows with a new, stronger tape, I'm going to have a somewhat mismatched bellows.

Lester, of the tapes available, is there one that basically visually matches the original tape, but is much stronger? Also, is it absolutely necessary to strip off the old tape or is it possible to tape over the gold tape, given that it is so flimsy?

Title: Re: Bellows Tape?
Post by: Lester on September 04, 2011, 08:43:31 PM
Lester, of the tapes available, is there one that basically visually matches the original tape, but is much stronger? Also, is it absolutely necessary to strip off the old tape or is it possible to tape over the gold tape, given that it is so flimsy

The available tape from Charlie Marshall is much better quality so does not match the original tape. If it were me I would strip all the tape off and replace it all but it is a pain to do.
Title: Re: Bellows Tape?
Post by: AirTime on September 04, 2011, 09:28:45 PM
Thanks for the links Lester, however, I'm not in the UK - does anyone know a good source in N.A. - preferably Canada?

I guess at some point I will re-do the back of the bellows. I have temporarily used some of the green painters tape to patch the areas effected. This tape is very easy to remove. I don't know how effective it will be in resisting wear, but at least it will allow me to play a bit without incurring further damage to the bellows material. I have a feeling the back of the bellows was rubbing against the left shoulder strap buckle a bit, but frankly, even before I was using the shoulder straps just rubbing against the fabric of my clothes was enough to remove the gold of the tape, which is kind of pathetic. 

The older Pokerwork with the black tape doesn't wear in the same way.  Don't the new Pokerworks have that same gold tape + the Ericas? What are they thinking at Hohner?!
Title: Re: Bellows Tape?
Post by: juker on September 04, 2011, 09:42:55 PM
I live in Australia and purchased tape and a few other odds and sods (a set of cagnoni D/G reeds!) from Charlie Marshall and they all arrived promptly and well packed.
Title: Re: Bellows Tape?
Post by: AirTime on September 21, 2011, 03:35:26 AM
My blue painter's tape is holding up pretty well - annoyingly, much better than the gold tape the Pokerworks come with.  ::) It is protecting the bellows from any further wear & it's easy to remove as the tape is designed to peel off easily.

I will eventually get around to replacing the tape with "proper" tape. Is there a reason for choosing between either ribbed tape & non-ribbed? Incidentally, why does bellows tape generally come without a glue coating? It would seem to make the job much more complicated & messy than it needs to be?
Title: Re: Bellows Tape?
Post by: Stiamh on September 21, 2011, 02:18:28 PM
Thanks for the links Lester, however, I'm not in the UK - does anyone know a good source in N.A. - preferably Canada?

Frank Romano in Montreal: http://accordeonsfrm.com/

Choose Components, then Bellows Tape
Title: Re: Bellows Tape?
Post by: Graham Spencer on September 21, 2011, 03:27:56 PM
Thanks for the links Lester, however, I'm not in the UK - does anyone know a good source in N.A. - preferably Canada?


I'm in Cyprus, and my orders from Charlie arrive almost as quickly as they would in UK - usually only 48 or 72 hours.

Graham
SimplePortal 2.3.5 © 2008-2012, SimplePortal