Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: KLR on September 24, 2018, 12:59:29 AM

Title: New Corona bellows
Post by: KLR on September 24, 2018, 12:59:29 AM
Will the new bellows I see on eBay for Corona II/III fit my old IIIR, which was built early 70s I think?
Title: Re: New Corona bellows
Post by: Malcolm Clapp on September 24, 2018, 02:25:03 AM
A Corona II/III bellows measures 310 x 190 mm, while a Corona IIIR measures 330 x 205 mm. So the short answer is that they are not easily  interchangeable, though with some clever carpentry.....


Title: Re: New Corona bellows
Post by: KLR on September 24, 2018, 04:05:21 AM
I'll just go to the Slovenian guy, then.  Thanks for the info.
Title: Re: New Corona bellows
Post by: Rog on September 24, 2018, 05:38:44 PM
It’s worth looking at the bellows on the Hohner C Shop. The Corona bellows don’t come with frames - you have to glue on your own. I bought some Corona bellows this year, very reasonable price.
Double check your frame size and if necessary email them. They are v helpful. Or get Igor to make you some  (:) They seem to imply that these would fit a IIIR. Might be worth asking them.
http://www.hohner-cshop.de/en/Accordion/Parts-Accordion/Bellows/Bellow-310-x-190-for-Corona-II-III-III-R-gold-rot.html
SimplePortal 2.3.5 © 2008-2012, SimplePortal