Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: IanK on October 14, 2018, 11:18:53 AM

Title: Converting old Double Ray basses to modern style
Post by: IanK on October 14, 2018, 11:18:53 AM
Hello

I have been a member here for a while but not posted before. I play B/C and a bit of single row D.

I would like to understand the optimum way to convert the old Hohner Double Ray basses (designed to play on the B row) to the modern style to play in D/G/A etc. with minimum pitch change in the reeds.

I think it might be

C/G  - leave as C/G
B/F# - Tune to C/F
D#/G# - Tune to A/E
F#/E - Tune to D/G (noting E-D needs a shift of one tone)

Thanks
Title: Re: Converting old Double Ray basses to modern style
Post by: Theo on October 14, 2018, 12:28:35 PM
That’s a sensible approach, but there is one other factor to consider.  Usually C is the lowest pitch and bass B the highest, so if you tune the B up to C it will be an octave above the other C.
I have another mapping for the conversion which I will post later.
Title: Re: Converting old Double Ray basses to modern style
Post by: Theo on October 14, 2018, 12:47:24 PM
This is what I do:

B/F# to A/E
F#/E to D/G
D#/G# to C/F (or change this to D/F, what is the point of two push Cs?)
C/G  to C/G

More reeds to tune but most changes are down in pitch which can be done by tip loading with solder, and if you must have the C duplicated then they are in the same octave.
Title: Re: Converting old Double Ray basses to modern style
Post by: IanK on October 14, 2018, 02:26:25 PM
Theo

Many thanks for sharing this information.

Cheers
Title: Re: Converting old Double Ray basses to modern style
Post by: Andy on October 14, 2018, 03:48:46 PM
Mine is a Double Ray Deluxe rather than a regular Double Ray.
Theo did this conversion for me a while back, very pleased with the results.
Does not get played so much now but that's only because a Gaelic IVS BCC# 37/96 is my main box.

Andy
SimplePortal 2.3.5 © 2008-2012, SimplePortal