Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Rog on October 24, 2018, 05:04:18 PM
-
Back in the dim and distant past somebody stuck a go fast stripe of red tape around the casing of a Hohner, on the celluloid. Now the tape comes off but the red paint is left behind, and it’s a sticky 'orrible mess. I’m trying to work out the best way to get it off. Alcohol (meths) doesn’t touch it. I’ve found that Safe Cut (car paint restorer) sort of removes it, but it does somewhat smear it around, so I have to have several goes at it with a new cloth. Anybody got any bright ideas on how to remove this stuff?
I think the paint/colouring is mixed in with the tape adhesive, so something that disolves tape adhesive would be good. I can’t scrape it (though I haven’t tried using a bit of hard wood) without damaging the celluloid.
-
WD40 is usually good for removing sticky stuff?
-
I use Goo Gone. Harmless stuff based on citrus oil.
-
Cautious use of cellulose thinners or acetone will dissolve pretty much anything. Not sure what it does to celluloid, probably not good. I’d try it on a concealed place first.
-
Don’t use cellulose thinners, it will ruin the celluloid in no time.
Another safe solvent is naphtha available from your local newsagent as lighter fuel.
-
Thanks. I'll report back.
-
I'd agree with Rees. Goo Gone. Harmless and effective. Much better than solvents for this. Avoid cellulose solvents on celluloid. The clue is in the names.
And Goo Gone smells nice.
-
If that’s my box you’re talking about Rog, I know exactly what you mean. I think it was added because it was in a band and needed to be identified. It did come from Australia they do things different in those parts Cobber.
With books and “sticky back plastic†yuk! we use lighter fuel. It removes the tape from the pages but not the stains so that might not work. There’s another product we use called “ Icky sticky stuff “ again a citrus based substance but I’m not sure it will remove the stains. It’s probably worth following Lester with WD40 .dont get it near paper though.😱
-
Indeed Nick, I was going to say something like 'the owner knows who they are', but I thought I’d better maintain customer confidentiality. 8) But now that you’ve admitted it, the cat's out the bag... (:)
I might try WD but a) it smells a bit and b) I’ll have to be super careful where it goes, so I’m a bit wary. I might try lighter fluid first, or Goo Gone as per Rees' suggestion.
I thought the bellows would be a pain and the tape straight forward, but it’s the other way around...
-
Petrol?
SJ
-
I tried sticky stuff remover, but it was slow. WD40 works v very, liberally applied to a cloth and then onto the red inky gunk. Will follow up with T Cut.
-
I used to have a recipe for universal solvent but it seems to have disappeared...
-
Like it, Dick. The old ones are the best!
-
Back in the dim and distant past somebody stuck a go fast stripe of red tape around the casing of a Hohner, on the celluloid. Now the tape comes off but the red paint is left behind, and it’s a sticky 'orrible mess. I’m trying to work out the best way to get it off. Alcohol (meths) doesn’t touch it. I’ve found that Safe Cut (car paint restorer) sort of removes it, but it does somewhat smear it around, so I have to have several goes at it with a new cloth. Anybody got any bright ideas on how to remove this stuff?
I think the paint/colouring is mixed in with the tape adhesive, so something that disolves tape adhesive would be good. I can’t scrape it (though I haven’t tried using a bit of hard wood) without damaging the celluloid.
Try lighter fuel (petrol not gas) if there is anything left
T-Cut should remove it. If that doesn't work you could try scraping it with a sharp chisel held at right angles to the box then using T-Cut to put the gloss back.
Martyn
-
Thanks Martyn. WD40 shifted most of the gunk then the pukka original T Cut was deployed to bring it up to a sparkling finish.
-
Actually Rog, I thought I might keep the tape on there. >:E >:E ;)
-
Actually Rog, I thought I might keep the tape on there. >:E >:E ;)
I thought you might... I've kept the tape just in case >:E
But here it is looking nice and shiny.
https://photos.app.goo.gl/ZwbNSHddvRBkPuVX7
-
I'm surprised that T Cut doesn't take the lettering off.
-
I'm surprised that T Cut doesn't take the lettering off.
If I rubbed it hard on the lettering, I’m sure it would, but I didn’t. I just gently brought up the colour on the lettering. 8)
Interesting side note: how to get a mirror shine on french polish if you can’t manage it with a rubber... after applying and drying, 0000 wire wool and then car paint restorer, the really creamy variety, less abrasive than T-Cut...e.g. G3 Professional Paint Restorer ( brought to you by Will Kirk from The Repair Shop...though I’m sure it was me that suggested Safe Cut a couple of years ago...and it was Theo that suggested that to me...;) ).
-
Wow Rog, are you sure that’s my box?
-
The wonders that can be achieved with sufficient skill and an indecent quantity of 'seaweed paper' :|glug
BTW when did it loose it's novelty and stop being called seaweed paper ??
-
Wow Rog, are you sure that’s my box?
Yes...but it was a b****r to clean off. ;)
Just got the reed work to do (and partial bellows retape). The keyboard is like a Corona keyboard, so I’ve replaced the felt buffers as well. I reckon it’s going to sound pretty good...what with all that elbow grease and it being a three voice... :||:
-
I'm surprised that T Cut doesn't take the lettering off.
If I rubbed it hard on the lettering, I’m sure it would, but I didn’t. I just gently brought up the colour on the lettering. .
That's interesting: I stopped cleaning my Viktoria casework because even gentle cleaning with a dry cloth was lifting the lettering. Still pondering the best way to go on that one....
Graham
-
Seaweed paper? Never heard of it, you're not back on that queer stuff, are you, Richard?
-
Wow Rog, are you sure that’s my box?
Yes...but it was a b****r to clean off. ;)
Just got the reed work to do (and partial bellows retape). The keyboard is like a Corona keyboard, so I’ve replaced the felt buffers as well. I reckon it’s going to sound pretty good...what with all that elbow grease and it being a three voice... :||:
So what model is it Rog?
-
Picked up the finished box from Roger T (Jolly Roger Accordions) and it is fantastic. There is absolutely no sign of that tape at all, and it plays like a dream..... an amazing machine and well done Roger for bringing it back to life .🎼 :||: