Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Pat McInnis on January 02, 2019, 07:33:11 PM

Title: BC Bass Advice
Post by: Pat McInnis on January 02, 2019, 07:33:11 PM
I'm putting together a BC Hohner two row from a CC# Pokerwork I have and it looks like the bass side does have some similar reeds to what I will need but just wanted to confirm what I will need to make this right. Maybe there are some already in place that will be "close enough"? Until I get my tuning game on I plan on buying a couple reed plates from Charlie Marshall just to get me going.

As usual, all advice is appreciated. Even if it includes an eyeroll.
Title: Re: BC Bass Advice
Post by: tirpous on January 03, 2019, 06:28:45 PM
Quote
(...) just wanted to confirm what I will need to make this right.

It depends on what you have exactly and, on what you define as 'right'.  Is your CC# Pokerwork bass side original or has it been modified?  There are a few bass layouts to choose from too...  See info here: https://hspeek.home.xs4all.nl/irishbox/basses.html (https://hspeek.home.xs4all.nl/irishbox/basses.html)

Generally speaking, it's not too difficult to lower chord or bass reeds by a semi-tone, a tone or even more (by adding solder to the reed tips).

 ::) (you asked for it!)
Title: Re: BC Bass Advice
Post by: Pat McInnis on January 03, 2019, 08:15:38 PM


Generally speaking, it's not too difficult to lower chord or bass reeds by a semi-tone, a tone or even more (by adding solder to the reed tips).

 ::) (you asked for it!)
[/quote]

I really did, didn't I. I'll have to plug that bass side into my one functioning box and see what I have. Someone has at the very least re-valved and waxed in reeds. Who knows what else. I'm probably just looking to tune it as the Double Ray from your link until I actually figure out what I'm doing. Buying a few bass reeds from Charlie M. shouldn't set me back too much and it will get me playing sooner than later. The more I look at tuning reeds, the more intimidated I get. It will happen for sure but I'm not exactly rushing into it. Thanks for the link.
Title: Re: BC Bass Advice
Post by: Stiamh on January 03, 2019, 09:04:40 PM
I'm probably just looking to tune it as the Double Ray from your link until I actually figure out what I'm doing.

Pat - please figure out what you are doing first! DO NOT tune your bass side to the Hohner B/C layout shown in tirpous' link.

Go for the McComiskey layout or the Burke layout described higher up the page.
Title: Re: BC Bass Advice
Post by: Pat McInnis on January 03, 2019, 09:11:29 PM


Pat - please figure out what you are doing first! DO NOT tune your bass side to the Hohner B/C layout shown in tirpous' link.

Go for the McComiskey layout or the Burke layout described higher up the page.
[/quote]

Steve, I'm doing my best to ask the right questions but I feel like I'm spinning my wheels a bit. How about this. Which of the two layouts that you have now recommended would you suggest for me and why?
Title: Re: BC Bass Advice
Post by: Stiamh on January 04, 2019, 12:27:30 AM
The thing is, Pat, the original Hohner B/C layout shown is basically the original C/C# layout lowered by a tone - clearly the people at Hohner at the time were completely ignorant of what B/C boxes were being used for (playing Scottish and Irish trad), for which that layout is almost completely useless.

The Burke layout is probably the best because it avoids having the pull and push G chords on different button pairs. However, depending on what you start out with, the McComiskey layout might be easier to achieve, and is also more akin to a traditional C#/D layout, in case you find yourself swapping between the two systems.

Your other option is to just forget about the basses until you're ready to start using them.  ;)
Title: Re: BC Bass Advice
Post by: Pat McInnis on January 04, 2019, 01:18:23 AM
One of these days we need to just have another phone chat you and I. This is very helpful. I could ignore the bass side until I can play it but I'm more of a planner than that. (it's better to have a bass and not need it etc.) Plus, I'm ordering parts and would rather have everything I need at once since it usually takes about 5 weeks to get stuff from Scotland for some reason.

I also didn't see the McComisky layout on his list. Could it be under a different name?

[[ADMIN]]. unnecessary quote removed.

Please see this topic on Quoting Etiquette (http://topic http://forum.melodeon.net/index.php/topic,23242.msg277196.html#msg277196)
Title: Re: BC Bass Advice
Post by: Stiamh on January 04, 2019, 01:44:05 AM
I also didn't see the McComisky layout on his list. Could it be under a different name?

It's described just under the Paolo Soprani layout.

Quote
American-Irish boxplayer Billy McComiskey has introduced a modification of this layout, where one of the pressing C's (the inside pair)is retuned to a D.

Title: Re: BC Bass Advice
Post by: Pat McInnis on January 04, 2019, 03:15:25 AM
Thanks Steve. I can install one of these layouts and if it doesn't seem right for me down the road then it can be easily changed up.

Now which one? haha  :o

I actually got my C reeds cleaned, waxed and new valves on a different 10 row block for the BC project tonight(still need a b row as well as bass) and finished the C# row to replace the A on my AD.

Hopefully that doesn't get deleted for not being relevant. I just thought that I would point out some recent progress. ;)
SimplePortal 2.3.5 © 2008-2012, SimplePortal