Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Squeaky Pete on February 28, 2019, 03:19:51 PM

Title: Binci reed plates. Well, that's interesting.
Post by: Squeaky Pete on February 28, 2019, 03:19:51 PM
Many years ago when we were regularly playing in France, we met a very good English melodeon player who had recently built his own box.
We all thought this was a great idea and some of us ordered sets of reeds to get us started. This was all pre-internet so plans and pictures were hard to source.
Life and other stuff got in the way and I've just come across my little cardboard box of reed plates 30 years later.
They won't fit in any of my boxes so I'm going to have to have a think. I have loads of black walnut I can use, so I guess after all this time I'm going to have to build a melodeon after all.
The spec I asked for at the time was for a G/C with accidentals MML. I probably didn't anticipate having a stop for the low register but I see the value now.
I had no idea where the reeds were made but looking at them now most are stamped Binci and a few have professional marked too.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: John MacKenzie (Cugiok) on February 28, 2019, 03:31:13 PM
Plans?  Are such a thing as melodeon plans available?

SJ
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Squeaky Pete on February 28, 2019, 10:18:47 PM
We managed hurdy-gurdies, cornemuses, small pipes etc between us and Mel even made a fiddle.
It's mostly fairly small furniture type components and some engineering. Bellows might not be worth the effort.
I have access to a fully equipped furniture workshop so I fancy working something out. It might be all based on Hohner stuff as that's what I have to strip down.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on February 28, 2019, 10:56:40 PM
go for it i made a 2voice b/c 8 bass 21 treble buttons out of mahogany  bought all parts required for the build from carini de in italy  reeds from voci armoniche   i had no plans i bassed mine loosely on paolo castagnari and hohner i took a while part time but well worth it   good luck with it
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Winston Smith on March 01, 2019, 12:30:17 AM
blackdot1234, now that interests me! Did you keep a running total of the costs involved? Obviously there'll be electricity etc on top of the cost of the parts, but I'm only interested in the direct out of pocket expenditure for the new parts. Please?
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 01, 2019, 11:16:50 AM
hi all parts including reeds 2voice tipo a mano  voci armoniche and bellows came to 900 euros approx also including reed tuning  labour was free approx 120 hours
Title: Re: Binci reed plates. Well, that's interesting.
Post by: rees on March 01, 2019, 11:26:49 AM
hi all parts including reeds 2voice tipo a mano  voci armoniche and bellows came to 900 euros approx also including reed tuning  labour was free approx 120 hours

I have completed 28 instruments and the above figures would be my estimate too.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Winston Smith on March 01, 2019, 11:33:34 AM
Thanks, both of you. Most enlightening, another reason not to throw anything away then. I must admit that 900 Euros came as a bit of a surprise!
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Pearse Rossa on March 01, 2019, 12:25:03 PM
i made a 2voice b/c 8 bass 21 treble buttons out of mahogany 
Do you have any photos of it?
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 01, 2019, 12:34:47 PM
hi iwill try and upload some photos later
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Pearse Rossa on March 01, 2019, 12:55:40 PM
hi iwill try and upload some photos later
Good. Maybe start a new thread. It's always interesting to see what others are making themselves.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Dave Praties on March 01, 2019, 01:06:23 PM
Hi All, I don't have complete melodeon plans, but I do have a lot of Autocad drawings I made towards the instrument I am building. I have a set of drawings for the all wooden action, (photo attached which shows it in part), and the sound board/fondo, register slides, since I made all these on a laser cutter. If any one is interested in these, you are welcome to a copy.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: JD on March 01, 2019, 03:14:18 PM
For anyone who has recoiled in horror at the thought of the cost of Autocad there are free viewers available for Windows, Mac and Linux and (for those with good eyesight) Android and iOS.

Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 01, 2019, 03:23:04 PM
A few pictures of the box i built last year
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Squeaky Pete on March 01, 2019, 04:21:54 PM
For anyone who has recoiled in horror at the thought of the cost of Autocad there are free viewers available for Windows, Mac and Linux and (for those with good eyesight) Android and iOS.
Actually there are excellent free programs that allow a lot more than viewing. Draft sight is a brilliant free 2d design program that operates axactly like AutoCAD. I have an older version of AutoCAD on an old xp machine and draftsight on a newer laptop. They are both set up the same and files will open on either.
Back on the subject, I'd love to see any drawings or dimensions. I've just seen the firewood pile of walnut that I can use and there's enough to build half a dozen melodeons.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 01, 2019, 04:29:30 PM
hi you dont need much timber main boxes are only 6 mm thick  work from the sizes of the reeds and spacing in between plus how many voices you are planing   mine is 150mm x250 mm 21 treble buttons 2 voices
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Dave Praties on March 01, 2019, 07:21:16 PM
Blackdot, that looks like a lovely piece of work. I hope mine turns out as good. Have you any sound files so we can hear it?
For those of us with an academic email address, Autocad is available free of charge. I didn't know what it cost to buy untill I looked just now. Gulp indeed! Glad there are alternatives.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 01, 2019, 08:59:34 PM
Hi dave your keyboard looks great i have no dought yours will be stunning i have no sound bites of my box it sound very nice to my ear its the sound thats important at the end of the day  its all trial and error  plus tuning that gives great satisfaction  when you complete the box and play it for the first time good luck with it
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Pearse Rossa on March 02, 2019, 02:01:03 AM
A few pictures of the box i built last year
It looks good. Well done!
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Michael Driscoll on March 03, 2019, 07:46:06 AM
A few pictures of the box i built last year

I must keep in touch with this topic and those interested as I have ambitions myself to build one from scratch. I was at Emmanuel Pariselle’s course last year (and hope to return) and assembled my box, but would need to develop my woodworking skills, access workshop facilities and obtain materials to build from scratch.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: blackdot1234 on March 03, 2019, 02:15:31 PM
hi thanks for the positive comments  yes there is a lot of work in building a box you would need planer thicknesser, table saw ,band saw, router , chop saw plus a good set of hand tools buy extra sawn timber for errors and dont be affraid to have failures thats how you will learn a lot for anyone that has done the melodeon build course your half way there have a go and good luck
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Psuggmog Volbenz on March 18, 2019, 07:58:03 AM
hi thanks for the positive comments  yes there is a lot of work in building a box you would need planer thicknesser, table saw ,band saw, router , chop saw plus a good set of hand tools...

...unless you are skilled at prescision use of hand tools and have a large block to time to commit the this project, then a sharp handsaw, a square, hand plane, drill and a few chisels would suffice. I find that traditional Japanese style, thin kerf, pull saws work very well for making melodeon parts, especially the smaller bits. If one plans to go into production of melodeons, then a diverse quantity of stationary power tools with cuttung jigs is the way to go. This doesn't include the tools needed to make bellows. There used to be, and may still be, a yahoo group called " box builder" which had detailed plans for group members wanting to build a four stop one row box. Also descriptions and photos shared by members of their project boxes.
Title: Re: Binci reed plates. Well, that's interesting.
Post by: Squeaky Pete on March 18, 2019, 08:12:44 AM
I am definitely a machine based woodworker, and although I retired from my workshop last year I have access to machinery as capable as mine.
My approach would always be to use jigs for precise cutting and once you have a jig you can make as many bits as you want.
I'd always be keen to see plans and once I've investigated stop mechanisms etc, I'll start to produce a drawing for myself (and anyone else interested).
SimplePortal 2.3.5 © 2008-2012, SimplePortal