Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Matt Knight on March 26, 2019, 11:25:12 PM

Title: Button travel adjustment for Hohner Double Ray
Post by: Matt Knight on March 26, 2019, 11:25:12 PM
Hello!

Wondering if you fine folks might be able to point me in the right direction. I picked up a German Double-Ray recently and would like to pad the treble keyboard to limit the button movement, as they go too far down the holes when pressed. I wouldn't consider myself mechanically inclined by any stretch, but it seems like a fairly simple operation to somehow remove the plastic keyboard, glue maybe a felt-lined strip of wood in there, and slap it back on. I'm not even sure how to start detaching it with the least amount of risk. Betting there's a little more to it than that, and hoping for some guidance.
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: tirpous on March 27, 2019, 12:09:19 AM
See this thread:   http://forum.melodeon.net/index.php/topic,23627.0.html (http://forum.melodeon.net/index.php/topic,23627.0.html)

... and this video:   https://www.youtube.com/watch?v=AVtbYmi1oxE (https://www.youtube.com/watch?v=AVtbYmi1oxE)
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: Lester on March 27, 2019, 07:48:21 AM
Fairly sure one of these would fit, video of me fitting one due soon.


https://www.acorninstruments.co.uk/inst.cfm?instID=24 (https://www.acorninstruments.co.uk/inst.cfm?instID=24)
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: pete /acorn on March 27, 2019, 01:22:22 PM
Hi
Yes they do fit the Double Ray
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: Matt Knight on March 27, 2019, 03:34:21 PM
Thanks for all the quick replies! Had a good feeling about this place :)
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: Pat McInnis on March 27, 2019, 08:25:05 PM
I have a foam anti-fatigue mat that I have in my garage that I have been using. It's about 1/4" thick and cut to fit inside the button board. It takes a bit of encouragement to get the button board back into place but it's been working good so far. I didn't even glue the last one. Just friction fit.
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: Matt Knight on March 29, 2019, 05:56:47 AM
I have a foam anti-fatigue mat that I have in my garage that I have been using. It's about 1/4" thick and cut to fit inside the button board. It takes a bit of encouragement to get the button board back into place but it's been working good so far. I didn't even glue the last one. Just friction fit.
Cheers Pat, that sounds like an excellent solution. Between that and checking out Lester's video(s) I cannot wait to get my box back from the tuner next week and start in on the keyboard. Thank you for your suggestion!
Title: Re: Button travel adjustment for Hohner Double Ray
Post by: folkloristmark on March 29, 2019, 12:07:54 PM
The foam is a good soft option .But becareful as you put the keyboard back on its a little harder ,make sure it does not ruck up.Also on older instruments if there is a curve in the board or keys it can be hard this way to get an even response.If you start layering it gets trickier. A wood bead behind the grill or under the mech, you can see both option on this site. can be softened with a overlay.The finger board on older instruments sometimes can crack with removal . The acorn keyboard makes all the fitting a lot easier.You can mod a cracked keyboard in such away yourself with some wood working skills.I try and soft fit most of my Hohners but I dont really know if it does that much difference as you get used to playing them.Imho, It is a balance between button travel and pallet lift correctly adjusted buttons and pallets should not give a problem.All the options above should be reversable.
SimplePortal 2.3.5 © 2008-2012, SimplePortal