Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Mark Leue on April 11, 2019, 01:42:37 PM

Title: Heavy breather
Post by: Mark Leue on April 11, 2019, 01:42:37 PM
I know it's mostly about my technique as I'm still learning to "sip" air when I need it, rather than take a gasp when I'm desperate, but I'm just curious; are instruments with larger air valves a lot less noisy when it comes to a big gulp?
Has anyone tried expanding the set up on a pokerwork, and did it help? and if so, how, can you keep the same mechanism, with a bigger hole and a larger pallet to cover? probably not worth the effort, correct?
Title: Re: Heavy breather
Post by: Winston Smith on April 11, 2019, 02:14:13 PM
You'll probably find that it's not worth the bother, as you'll soon get either used to it as it is, or your playing will improve so as to not need to have so much air valve use. Most other Pokerwork players seem to manage OK, and so will you eventually!
Title: Re: Heavy breather
Post by: Anahata on April 11, 2019, 02:18:46 PM
I once had a Saltarelle Connemara III with a very big air valve. The air flowing though the valve was quiet, as you'd expect with less restriction, but it was very hard to use the air valve while playing a note because if I released the button there'd be a big bump in the sound of the note as the valve slammed shut (I suppose the inertia of the moving bellows would create a pressure pulse as it had to suddenly slow down.) I did wonder at the time whether the air valve design could have been a bit less "all or nothing" with a more gradual opening as you pushed the button down.
Title: Re: Heavy breather
Post by: boxcall on April 11, 2019, 02:42:04 PM
I thought this might be about the player being a heavy breather :P, I think I was when I started, that plus grunts ::)
you'll get over the air issue in time/ with practice.
Title: Re: Heavy breather
Post by: Pat McInnis on April 11, 2019, 03:40:29 PM
I thought this might be about the player being a heavy breather :P, I think I was when I started, that plus grunts ::)

Haha, same. Thought I was on the whistle forum for a second.

A few times playing for my girl she asked me what the heavy "Darth Vader" sound was. I guess I had already gotten used to it. Hoping it will fade as I improve.
Title: Re: Heavy breather
Post by: Tone Dumb Greg on April 11, 2019, 06:36:48 PM
There was a thread on this topic a week or two ago.

https://forum.melodeon.net/index.php/topic,23543.msg281384.html#msg281384

My pokerworks seem much easier to control the air on than my Saltarelle, which I've been playing long enough to get to know quite well. I am tempted to do something about it. I know a small change can make a big difference. Also, I understand the form of the hole lip has an effect on air flow.
Title: Re: Heavy breather
Post by: george garside on April 11, 2019, 08:06:15 PM
if one feels that ones airhole is too  big it can easily and reversibly be reduced by partialy taping over said orifice

george
Title: Re: Heavy breather
Post by: Jesse Smith on April 12, 2019, 03:12:39 AM
The previous owner of my Pokerwork enlarged the air hole (rather crudely, I have to admit!). What it means for me is that I never push the air lever all the way down. I just sort of nudge it gently while playing and pull (occasionally push) a bit harder so that the volume stays constant and I can take up quite a bit of air midstream. Having never played a standard Pokerwork, I'm not sure how that compares to the usual experience. I might experiment with what George suggested and tape off some of the hole.

Some people don't like to hear a melodeon gasping for air, but I have to say I kind of enjoy it when I can hear it on a recording. I view it as similar to the squeaks of fingers on the strings of a guitar; it's one of the sounds that go into making a melodeon sound like a melodeon.
Title: Re: Heavy breather
Post by: Lester on April 12, 2019, 07:48:27 AM
I'll just leave this here
https://youtu.be/V7MnV2NCzbw (https://youtu.be/V7MnV2NCzbw)
Title: Re: Heavy breather
Post by: Peadar on April 12, 2019, 12:17:36 PM
British players of a certain age and life experience (possibly the school train!) may remember the emergency brake stand in railway guards vans. A grey painted cast iron pipe five foot high with a red handle attached to a large valve on top. In an emergency hit the handle up. Instant demolition of the vacuum in the train pipe and the brakes full on. First experience of poker work air valve transported me back several decades.
Title: Re: Heavy breather
Post by: Theo on April 12, 2019, 12:49:25 PM
With a little practice you can learn to control a pokerwork air valve so you can get everything from a slight air bleed to a big gulp of bellows going in or out.  Some Italian air valve of the push in type can get stiff and become difficult to control, but that can almost always be improved by careful adjustment.  The place where the underside of the button contacts the metal lever is the usual culprit because there is a sliding component to the way the button pushes down on the lever.  Some graphite on the contact area usually helps.
SimplePortal 2.3.5 © 2008-2012, SimplePortal