Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: IanK on September 01, 2019, 01:28:54 PM

Title: Bass / Chord Reed Source for B/C Burke Tuning
Post by: IanK on September 01, 2019, 01:28:54 PM
Hi All

I have sorted up an old Hohner Double Ray and with guidance here managed to retune the bass reeds to the 'modern' system (except I have Bmin/F rather than C/F).

This system has C/G and G/D pairings. I would like to try the Joe Burke system where these pairs would be G/G and D/D.

Looking for advice on a source for suitable reeds that would sound good along with the other original H reeds in the box and would fit the reed blocks with minimum need to alter the blocks.

thanks Ian
Title: Re: Bass / Chord Reed Source for B/C Burke Tuning
Post by: Theo on September 01, 2019, 01:42:45 PM
If you prefer old reeds then an old Hohner piano box is a good source.  For new reeds ask Charlie Marshall (http://www.cgmmusical.co.uk/CGM_Musical_Services/Reed_Plates.html)
Title: Re: Bass / Chord Reed Source for B/C Burke Tuning
Post by: IanK on September 01, 2019, 02:51:46 PM
Thanks Theo,

Would the old Hohner PA reeds be likely to fit the chambers without need to modify?

If not then I will try Charlie and see what he recommends.

Cheers Ian
Title: Re: Bass / Chord Reed Source for B/C Burke Tuning
Post by: Theo on September 01, 2019, 03:16:54 PM
The low bass reeds won't fit without modifying the block.  You should find some that work for the chords.
SimplePortal 2.3.5 © 2008-2012, SimplePortal