Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Scotty Gring on September 05, 2019, 02:33:08 AM

Title: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Scotty Gring on September 05, 2019, 02:33:08 AM

What happens when a fellow buys a new Dremel tool, is anxious to use it to "gently clean" the holes in a 10 key keyboard, is in poor light and he's consumed way too much coffee in one day?  I'd like to say I'm asking for a friend.  I knew I should have stayed away from that thing- or at least waited for Lester's video on how NOT to enlarge keyboard holes when you've accidently applied just a smidgeon too much poly on the keyboard.  So here I am asking if anyone has an old abandoned 1 row keyboard they'd be willing to sell for an old 1040C that's almost done?  Not a lot invested in this little burl box, but this is the first official piece of junk box I bought a year ago with visions of fixing it up.  Now I have a keyboard that looks like someone shot with a pistol. 

Paper envelope inside for contrast.  Maybe it won't look as bad when I get it back to the bench and put it back on...
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Winston Smith on September 05, 2019, 09:32:12 AM
Well; Beam Me Up! If you're finished with that keyboard, just send it to me, I promise to make good use of it.
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: John MacKenzie (Cugiok) on September 05, 2019, 09:38:43 AM
I think you should change your name again Winston, and I suggest Autolycus, a character from A Winter's Tale, by W Shakespeare Esq.

"My traffic is sheets; when the kite builds, look to
lesser linen. My father named me Autolycus; who
being, as I am, littered under Mercury, was likewise
a snapper-up of unconsidered trifles."


The last half a dozen words, define you to a Tee ;)

SJ
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Winston Smith on September 05, 2019, 09:54:58 AM
I don't like unnecessary waste, Sir John. I rather see myself as a cuddly old Womble. You know, "making good use of the things that we find", and all that?
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: folkloristmark on September 05, 2019, 11:15:43 AM
I say Winston I would use that keyboard, it don't seem that bad, is it just that it reminds the owner of his folly. You wont see it after a while the buttons should not stick?. Not much invested, so limit the button travel and forget. If really bothered veneer the top and redrill?
Kind regards
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Nick Collis Bird on September 07, 2019, 08:05:30 AM
I don't like unnecessary waste, Sir John. I rather see myself as a cuddly old Womble. You know, "making good use of the things that we find", and all that?

Ha!......Uncle Winston Bulgaria 😳
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Scotty Gring on September 07, 2019, 02:34:17 PM
i placed back on the on the box and it's hideous!  I like the suggestion of a laminated plate and I will hold on to it to experiment.  In the meantime I've purchased an old junky Beaver at a bargain price that I'll strip for parts.  I'm hoping that aside from learning to fix and fettle, I might also learn some frugality from you fellows.  (Most "f"s I've ever used in one sentence without profanity.)
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Peadar on September 07, 2019, 02:47:50 PM
Veneer over the holes. Make a new bottom cover plate of 8 gauge aluminium. Then set out and drill/file key holes in the auminimum cover and finally refit  the fingerboard upside down.

Job's a good 'n.
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Theo on September 07, 2019, 03:42:44 PM
There’s a bit more to it than that, the base of the keyboard where it fits onto the box is not at a right angle, so turning the keyboard over will not work without additional work.

Another plan, if you have access to a bandsaw - slice of the top of the keyboard,  make a new top out of 3mm aircraft ply or aluminium, attach it with screws and you have better keyboard than you started with.
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Tone Dumb Greg on September 07, 2019, 03:48:42 PM
What about Delron or wood top hat profile bushes? Fairly straightforward to make if you have access to a lathe
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Winston Smith on September 07, 2019, 06:02:45 PM
"it's hideous!"

Actually Scotty, after all the excellent advice about remaking/repairing your keyboard in different ways, I think that you'll struggle to produce something that you'll be really happy with. Getting the elongated holes in straight lines and  properly centred will be the devil's own job!
Perhaps it would be better to just bite the bullet (if you have the readies) and get one of Pete Ward's new wooden jobbies.
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Lester on September 07, 2019, 06:07:26 PM
Perhaps it would be better to just bite the bullet (if you have the readies) and get one of Pete Ward's new wooden jobbies.


Pete doesn't make one row replacements
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Winston Smith on September 07, 2019, 06:11:19 PM
Obviously my mistake, sorry! Thanks for the nudge, Mr Bailey.

I suppose that Hohner will still sell them, in plastic.
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Lester on September 07, 2019, 06:12:34 PM
Obviously my mistake, sorry! Thanks for the nudge, Mr Bailey.

I suppose that Hohner will still sell them, in plastic.


http://www.hohner-cshop.de/en/Accordion/Diatonic/1-row/Vienna-Model-114-C/Trebble-keyboard-Wiener-one-row-with-thumb-strap.html (http://www.hohner-cshop.de/en/Accordion/Diatonic/1-row/Vienna-Model-114-C/Trebble-keyboard-Wiener-one-row-with-thumb-strap.html)
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Scotty Gring on September 07, 2019, 08:46:34 PM
I don't know why I can't shop the European C-Shop - it always redirects me to the US version that's basically worthless with nothing in stock.  I've got a beat-up Beaver brand on the way I picked up on Ebay yesterday (and a bit less money than the plastic one at the E-shop).  I'm betting it's old enough that it's a shared keyboard.  Maybe I'll pick up some decent reeds (as well as some straps).  Thank you everyone for the ideas.  I'm still going o try skimming off the top of the offending one and put a laminate on top (using the Beaver brand one as a template if all goes well). 
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Peadar on September 07, 2019, 09:03:12 PM
 Sounds like you are sorted, but if not, then maybe?

http://www.cgmmusical.co.uk/CGM_Musical_Services/Hohner_Parts.html#30
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: folkloristmark on September 07, 2019, 11:43:40 PM
Charlies got one then
Title: Re: Anyone know of an orphan 10 key pokerwork keyboard?
Post by: Scotty Gring on September 08, 2019, 02:12:10 AM
Just placed an order with him last week.  I wish I had known before my mishap with the Dremel.  Waiting for that order to get released from customs. 
SimplePortal 2.3.5 © 2008-2012, SimplePortal