Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: mselic on April 13, 2020, 07:44:48 PM

Title: Drilling into plastic/bakelite keyboard
Post by: mselic on April 13, 2020, 07:44:48 PM
I have to drill a new hole for a thumbstrap on a plastic/bakelite Hohner keyboard. Are there any concerns of it splitting/cracking in the process? I figured it would support the piece from underneath/within the keyboard and go slow?
Title: Re: Drilling into plastic/bakelite keyboard
Post by: mselic on April 13, 2020, 08:24:52 PM
Nevermind - I followed my own advice and it was no trouble at all!
SimplePortal 2.3.5 © 2008-2012, SimplePortal