Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Emi nabius on May 19, 2020, 04:49:07 PM

Title: Reeds supply
Post by: Emi nabius on May 19, 2020, 04:49:07 PM
Hello!
I am searching for a set of reeds for a 2 1/2 rows 8 basses melodeon that i'm building.
The problem is that I don't have a VAT number cause i'm not professional and I am having a hard time searching for a distribuitor that will sell me a pair of sets.
I am from Catalunya, Spain, and it will be very helpful if you knew someone...
Thank you very much
Title: Re: Reeds supply
Post by: Tone Dumb Greg on May 19, 2020, 06:10:01 PM
Hello!
I am searching for a set of reeds for a 2 1/2 rows 8 basses melodeon that i'm building.
The problem is that I don't have a VAT number cause i'm not professional and I am having a hard time searching for a distribuitor that will sell me a pair of sets.
I am from Catalunya, Spain, and it will be very helpful if you knew someone...
Thank you very much

Charlie (CGM) sells Cagnoni Italian reeds and Hohner reeds. I'm sure he won't be shut forever.
Title: Re: Reeds supply
Post by: mselic on May 19, 2020, 06:28:25 PM
Carini.
Title: Re: Reeds supply
Post by: Rog on May 19, 2020, 06:33:44 PM
Right. So I’ve just bought a set of reeds from Harmonikas, and also two sets of reeds direct from CAGNONI (their basic ones plus a set of TAM reeds). You do not need a VAT number. You pay their VAT and shipment and they arrive in the post. It’s not hugely expensive, though the shipping is €30 (€20 in the case of Harmonikas) so it does bump it up a bit. But it is quite a bit cheaper than buying a full set of Hohner reeds from Hohner. I aim to compare the Harmonikas Dural with Cagnonis basic reeds in two Corsos.
Title: Re: Reeds supply
Post by: Emi nabius on May 19, 2020, 07:40:58 PM
You do not need a VAT number. You pay their VAT and shipment and they arrive in the post.
Should i speak to cagnoni directli? I tried with voci armoniche and they told me they won't sell to me directly.
Also, another question (maby dumb, but i'm new here and i'm learning by myself ::) :
I saw at carini's that they sell sets but none of them fits my project. So, I maby can speak to them and ask for the kit I need... But I was wondering, won't chromatic reeds do the job? I mean, if I get an G reed plate to tune G in one reed and a A in the other by filing the tip?
Thank you for your responses!
Title: Re: Reeds supply
Post by: Theo on May 19, 2020, 08:02:57 PM
Talk to Carini,  they are very helpful. 
Title: Re: Reeds supply
Post by: Nigel.H on May 19, 2020, 08:34:53 PM


Charlie (CGM) sells Cagnoni Italian reeds and Hohner reeds. I'm sure he won't be shut forever.

He may not be shut now...... ;)
Title: Re: Reeds supply
Post by: JNM SY on May 19, 2020, 08:43:49 PM
"I mean, if I get an G reed plate to tune G in one reed and a A in the other by filing the tip"

This will work but its easier to start with an A reed and weight the other side down to G with a small blob of solder.
 If it goes wrong you can melt off the solder and try again.  Good luck - John.

PS. Make sure to clean the reed or the solder wont stick
Title: Re: Reeds supply
Post by: blackdot1234 on May 19, 2020, 08:52:38 PM
with the covid 19 shut down all reed suppliers are way behind with orders so if ordering be prepared to wait its worth waiting for good quality reeds buy once and they are a life time job if looked after by a good tuner from time to time
Title: Re: Reeds supply
Post by: Andrew Kennedy on May 19, 2020, 11:12:49 PM
CGM is open for business. I had a delivery today.
Title: Re: Reeds supply
Post by: komat on May 20, 2020, 03:59:23 AM
Carini is the way to go.
Title: Re: Reeds supply
Post by: Emi nabius on May 20, 2020, 09:04:42 AM
This will work but its easier to start with an A reed and weight the other side down to G with a small blob of solder.
 If it goes wrong you can melt off the solder and try again.  Good luck - John.

PS. Make sure to clean the reed or the solder wont stick

Ok, i'm not an english speaker, and I understand that solder means weld with tin? If not, correct me please, and thank you for the advise!
Title: Re: Reeds supply
Post by: Theo on May 20, 2020, 09:42:14 AM
If you will buy new reeds it makes no sense at all to buy chromatic reeds and then re-tune them.  That way you have a lot of work and unless you are skilled with reed work you may end up with a less than good result.  That’s especially true of the small reeds for the high pitches where there can be a big difference in pitch like A/E at the highest note on a D row.
SimplePortal 2.3.5 © 2008-2012, SimplePortal