Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: davidd on July 27, 2020, 07:33:17 PM
-
I just received a 3 voice Hohner model 3515, the one with the leaf decorations. It is in GC and I am planning to switch it to BC. I am looking at getting a set of Harmonikas TAM reed as they seem to be quite reasonably priced and I have seen some good recommendations for them.
So I am wondering how I should specify what I want. Would just ordering a standard 3 voice MMM BC set be enough or do I need to include a more technical description?
Thanks, David
-
You need to specify the individual reeds that you want to be completely sure of getting what you want, and also as a reference point if you need to dispute discrepancies later. Harmonikas have a numerical system for identifying individual pitches which I have seen on their website. Also be aware that you will likely need to do some modifications to the reed blocks before the reeds will fit. Czech and Italian reeds are generally longer than Hohner reeds. Also the reed plates used for the bass reeds are thicker, a little longer and narrower than Hohner bass reeds. Sometimes you have to be creative to fit the bass and chord blocks.
The reeds in Hohner 3515 always seem to be very good quality with a great sound, I think it's a bit of a shame to replace them. There are 3 voice BC versions of the same box around badged as Double Ray.
-
Another possibility is to make the B row reeds from the G set. If you look at G row layout there are many reeds that are close to what you need.
-
I order from Harmonikas using the standard system: G4/A4, B4/C5, etc.
No problems so far.
-
What Theo said.
That's what I'd do.
Actually my GC is a retuned CC# - it works both ways.
-
Thanks for the info on ordering reeds. Theo, I have read about these reeds being really good. That is why I am a bit reluctant to just tune the G row up to B. Unfortunately the valves and wax are in pretty poor condition so I can't really tell how they will sound. I have been looking for this type of box in bc but they are not easy to find. Nothing will be happening too soon so we will see what happens.