Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Gonk on July 28, 2020, 04:45:32 PM

Title: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Gonk on July 28, 2020, 04:45:32 PM
I am repairing and modifying some Hohners, and looking for parts.

- Fingerboard for a 50s (?) Pokerwork-similar 2-row, any condition except smashed.
  (I know CGM sells these, but I thought I'd ask around first.)

- D reeds, on or off the block, either 11- or 10-reed set, MM.  They're to complement a set of C# Hohner reeds that look like steel on zinc plates with a corner notch but no letter - but I would be happy to find any set of steel reeds.

- The bass block from a 12-bass, just the 'roots' block, with 6 large holes on the bottom.  This one may be a long shot...
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Lester on July 28, 2020, 04:52:49 PM
If you can't source a fingerboard here I would recommend one from Acorn Instruments. Removable back panel to enable proper set up of the keyboard
https://www.acorninstruments.co.uk/listing.cfm?inst=153
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Gonk on July 28, 2020, 05:04:27 PM
Lester, that's an attractive option I hadn't considered, thanks!  If it does come to buying a new one, the removable back would be very nice.  I've been limiting the action on the other type by gluing pieces of wood to the tops of the button arms to keep them from going too high.  It works, but is a chore.

Thanks for your video tutorials as well, they've been very helpful to me.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Steve_freereeder on July 28, 2020, 05:14:39 PM
Another vote from me for Acorn Instruments' wooden keyboards They are very good indeed.

But another effective method is Theo's strip of wood under the base of the levers.
https://theboxplace.co.uk/2017/11/12/hohner-button-travel-restriction/

I've used this method successfully too. The only change I make to Theo's method is to put a strip of thin leather (chamois works well) over the top of the wood strip; it reduces the action noise even more.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Gonk on July 28, 2020, 05:29:58 PM
But another effective method is Theo's strip of wood under the base of the levers.

I agree, but when the keys are the sort with just a wooden bar, lifted from beneath with a small spring, connected to the pallet rod, I don't see an equally elegant fix.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Theo on July 28, 2020, 06:18:54 PM
With that keyboard design there is usually a removable strip along the edge of the keyboard that is help in place by two screws.  Once that s off you can see the underside of the levers.  There is only limited space but I’ve just padded one of the same design with small blocks of hard felt glued under each lever.  I used a pair of long nosed tweezers to position the felts.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Theo on July 28, 2020, 06:20:48 PM
And that is not a 1950s Hohner, more like 1930 or earlier.  You can’t replace the keyboard housing because it is part of the mechanism.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Peadar on July 28, 2020, 07:01:17 PM
And that is not a 1950s Hohner, more like 1930 or earlier.  You can’t replace the keyboard housing because it is part of the mechanism.

Which is what I understand as a wooden action - the button is on a wooden lever and the fearsaid (spindle?/axle?) is mounted into the wooden keyboard.

I think you could replace the wooden action with a new metal one, cut the action out of the old keyboard and re-use the casing......some people might call that stam punk ...I would call it taxidermy and I wouldn't see it as an upgrade.

 I have an idea that 1927 was the year that Hohner switched over to the modern metal action, given the volume of their production pre the crash of 1929  it probably didn't take many months to phase out wooden actions for button accordions.
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Gonk on July 28, 2020, 07:16:54 PM
With that keyboard design there is usually a removable strip along the edge of the keyboard that is help in place by two screws.

I have seen that too - that makes things a lot easier.  But the one in the previous photos doesn't have that.  It is definitely older, and it's interesting to hear more accurate date information.

I was unclear; the fingerboard I'm hoping to find is for a different box, one that does have the metal key mechanism, and I will be able to use the Lester-5-by-10-mil-pine-strip plus Steve-chamois stoppage technique on any non-Acorn fingerboard I might be able to locate.  Fortunately the older box pictured above does not require a new keyboard and I won't have to make any Frankenboxes.  In fact, I am almost finished restoring it - just refacing the pallets now.

The one I'm starting work on is what I took to be a 50s box, pictured here.  But it is probably older as well (30s? 40s?)
Title: Re: Wanted - Hohner fingerboard, D reeds, bass block (USA)
Post by: Theo on July 28, 2020, 07:40:20 PM
Older I think,  but parts are interchangeable with later models.
SimplePortal 2.3.5 © 2008-2012, SimplePortal