Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Penny Player on October 28, 2020, 12:22:30 AM
-
I just received back the Paolo Soprani that I sent off to Scott Bellinger to restore. It is so sweet looking and sounding that I want to share my joy with everyone. You can see the work done here https://www.youtube.com/watch?v=8pfgKRzwkBI (https://www.youtube.com/watch?v=8pfgKRzwkBI) and hear her ring towards the end of the video. I'm a petite woman and this box is just perfectly sized for me, smaller than my old Pokerwork and even lighter, at around 5 lbs or so. Scott mentioned to me that he has a few more of these available to restore. If you are looking for a smaller box with a full sound, it is definitely worth considering. I've purchased two other boxes from Scott. I've been very pleased with both, and right now I'm overjoyed with my new main squeeze.
-
I have a similar style Paolo Soprani. Your pictures and video give me inspiration and ideas about restoration.
Mine has a 9-button outer row in B-Flat and a partial 6 button row in E-Flat. There are 4 bass buttons. The tuning is close to A-433.
Decades ago when I bought this "armoniche" at the flea market (boot fair), most of the reed plates were rattling around inside the bellows. I hope I got everything in back in the right place. The treble side matches my two-row Koch in B-Flat / E-Flat.
Things are a bit confusing with the Bass side having only four buttons. I have bass and chords for a pair of B-Flats and also an F and an E-Flat.
An additional thought... Could this be an organetto? Maybe the inner row should have some reed plates flipped from a standard two-row.
-
I'm glad you enjoyed the pictures and video. It was quite a project but turned out well. It had a very nice sound for such a small and light instrument. Is yours also a 3 voice?
BellingersButtonBoxes.com (http://BellingersButtonBoxes.com)
Scott
-
Mine is a two voice MM, no switchable L. The sound of your box is quite beautiful. In its present form, mine sounds more like a goose. That is a bit of an exaggeration, but the tuning on yours is magnificent in comparison.
I will have to check out more Bellinger videos. I am very impressed.
I clicked on the link. In the picture, I see a Mervar button box from Cleveland!
-
I found the Anton Mervar C/F/Bb video! I hope to get back to Cleveland again to jam with my Slovenian polka pals. Things have been on hold for over a year. I want the old normal back.
-
Dave-
Perhaps you're not too far away. I'm near Rochester NY. Cleveland is about 4 hours west. If you are ever traveling this way give me a heads up. I will provide a shop tour and many boxes to test squeeze.
Scott
-
I enjoyed your video of the repairs to the old Paoli, and was surprised that you oiled the reeds, albeit diluted with alcohol to give a thin coating - doesn't this allow dust etc to stick to the reeds? Do other fettlers do this?
-
I now use 3-in-1 dry lube which I believe is a silicone or PTFE based rust inhibitor instead of oil. My mistake for the incorrect post. I used to use diluted oil but switched to dry lube several years ago. It is completely non-sticky and imperceptible after application. I do still dilute it further using acetone.
https://www.3inone.com/products/dry-lube/ (https://www.3inone.com/products/dry-lube/)
Scott