Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Gav Wood on November 21, 2020, 09:27:44 PM
-
I have not seen this before, so am asking if sensible. For future reference and also to prevent present mistakes.
The first 10mm or so of the bellows card is at 45 degrees, then the rest is at 60 or so to let the leather have the movement.
I am cutting these down from a junker. Is a paolo soprani continental, but so big it is not usable. Bought off ebay from france for the reeds. The inside of the bellows are also taped, and the folds are large, about 34mm.
So should the card be cut at 45 degrees then the extra cut, or all at the same angle?
Maybe it doesnt matter but not seen it before. Maybe will keep the same for this one, but be useful to know for future.
Also the gussets on this are a lot more pliant than other bellows and do not stretch to taut when at full extension. Not sure either if this means anything.
Opinions welcomed
Gavin
-
This at 7mins 30 secs has a new set being cut & chibbled.
https://www.youtube.com/watch?v=6nmUhz7ciwk&list=RDU--Vf99jyTA&index=12
-
Ahh. So best way is to cut to final and nibble. I may need a new tool for that.
Brilliant video, thank you, had not seen it before.
-
Simple (and usual, I think) approach is a single angled cut all the way across. Maybe not 60° but something more than 45°, to leave room for leather gusset folds.