Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: António Vilela on January 01, 2021, 11:53:42 PM

Title: Model identification
Post by: António Vilela on January 01, 2021, 11:53:42 PM
Hi all,

Would appreciate any help to identify a concertina I recently purchased.
Photo is attached, more photos here (https://app.box.com/s/t4r7osnbpqti0xfw90ysus7t7u2fvhpx).

It has 2 rows (12+11) plus two additional buttons om a third row.
These are repeats of top button of each row.

Original tuning is F/Bb.
Two top buttons are accidentals (B/C# and Ab/F#).

Detail photo shows Hohner markings, but they surely do seem handmade.
Behind it, however, a double-eight contour with two holes is visible, certainly from a previous plate.
In any case, quite a few features do look like Hohner's.

Thanks again for any help.

Best regards
Title: Re: Model identification
Post by: Steve_freereeder on January 02, 2021, 12:19:52 AM
Superficially it looks like an early Hohner Club Modell I, but I don't think it is a Hohner. The poor 'Hohner' name addition rather gives it away.
I think it is a Hohner copy which has been restored and renovated to 'look' like a Hohner. I'm not sure what the original name plate would have been.

Other possible non-Hohner clues:
1. The grille has four twist fixings; on a similar sized Hohner, there would be only two fixings.
2. The two-button half row being repeats of the top (chin-end) buttons. As far as I know, Hohner chin end buttons are always independant of the half-row buttons and can be tuned differently.

It would be interesting to see the reed blocks and reeds in the interior, which could provide additional clues.

Quote
Would appreciate any help to identify a concertina I recently purchased.
This is a melodeon or diatonic accordion, not a concertina, which is an entirely different instrument.

Title: Re: Model identification
Post by: paul.draper on January 02, 2021, 07:24:18 AM
Here's why Steve,

"The concertina is a diatonic accordion very popular in northern Portugal, mainly in the Minho Region (the portuguese northwest region), it became there their national instrument (in Minho region), the other northern region Tras Os Montes it isn't so popular, the still have the bagpipes also as one of their national instruments, in the Minho region the accordion substituted the bagpipe completely.
Portuguese Concertina - General Concertina Discussion ...
www.concertina.net/forums/index.php?/topic/15822-portuguese-concertina/
www.concertina.net/forums/index.php?/topic/15822-portuguese-concertina/"

Title: Re: Model identification
Post by: Theo on January 02, 2021, 08:07:19 AM
Nice looking box!  I’m pretty sure this is an early Hohner Club.  From the size and shape it is a 3 voice - every note has three reeds playing.  Hohner made instruments like this with a screw in the centre of each melody button up until about 1930 when they introduced the metal action.  I have one of the same model with a blue celluloid finish: https://theboxplace.co.uk/product/club-3v-bes/
Title: Re: Model identification
Post by: Steve_freereeder on January 02, 2021, 08:51:16 AM
Here's why Steve,

"The concertina is a diatonic accordion very popular in northern Portugal, mainly in the Minho Region (the portuguese northwest region), it became there their national instrument (in Minho region), the other northern region Tras Os Montes it isn't so popular, the still have the bagpipes also as one of their national instruments, in the Minho region the accordion substituted the bagpipe completely.
Portuguese Concertina - General Concertina Discussion ...
www.concertina.net/forums/index.php?/topic/15822-portuguese-concertina/
www.concertina.net/forums/index.php?/topic/15822-portuguese-concertina/"

It's a concertina, Jim, but not as we know it!
Title: Re: Model identification
Post by: folkloristmark on January 02, 2021, 04:30:22 PM
Hi
Imho its a hohner club 1. It has been refinished and lost its transfers at some point and someone proud  burnt the name back on.Its an older one and the plate would originally been woodcut they suffer from splitting.It probably originated at the Kotch factory.
Title: Re: Model identification
Post by: folkloristmark on January 02, 2021, 04:32:26 PM
PS If it is in Portugal or Portuguese America it is indeed a concertina
Title: Re: Model identification
Post by: folkloristmark on January 02, 2021, 04:37:37 PM
They may be repeats that one is octave repeats but Steve is right as they are not linked repeats on the club one.
Title: Re: Model identification
Post by: Theo on January 02, 2021, 04:45:47 PM
Agreed Mark that it is a Hohner Club, but it’s a 3 voice, so not a Club I. 

The one I have that I linked in an earlier post has the same notes on the extra 2 buttons as on the first button on each row.  Separate reeds, but duplicated notes.
Title: Re: Model identification
Post by: Winston Smith on January 02, 2021, 05:15:44 PM
"Separate reeds, but duplicated notes."

You'd (OK, I'd) imagine that they would have at least made them the next octave up.
Title: Re: Model identification
Post by: Steve_freereeder on January 02, 2021, 05:33:52 PM
"Separate reeds, but duplicated notes."

You'd (OK, I'd) imagine that they would have at least made them the next octave up.
Chin end accidentals an octave lower would be better.
Title: Re: Model identification
Post by: Theo on January 02, 2021, 05:41:57 PM
Well of course they can be changed,  but they were feeling their way towards a good way of extending the basic two rows. As today it depends on the player’s repertoire.  From time to time I get asked to do this sort of thing on a 2.5 row for a player who is transitioning from 2 to 2.5 rows and wants to keep the familiarity of standard accidentals at the ends of the main rows.
Title: Re: Model identification
Post by: Winston Smith on January 02, 2021, 06:50:17 PM
"Chin end accidentals an octave lower would be better."

Whatever!
SimplePortal 2.3.5 © 2008-2012, SimplePortal