Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Vallenato831 on January 22, 2021, 02:45:30 PM
-
Hohner corona's corso's case were made of a wood with a reddish color to it. Now coronas are made of a pale yellow wood. I have attached photos.
Any ideas on the type of wood used for both? Players in South America are complaining that the new style boxes does not give the same sound nor volume.
Box on the left side is new production.
-
The older cabinet wood looks like lauan (or meranti - 'Philippine mahogany' anyway) and the block holding the metal clips is beech. Not sure about the more recent box.
I'm repairing a (newer) GCF Corona for a friend and it seems to me that everything (wood, other materials, hardware, workmanship) has gone downhill. I guess what I'm trying to say is: it could be more than the wood :( .
-
The older cabinet wood looks like lauan (or meranti - 'Philippine mahogany' anyway) and the block holding the metal clips is beech. Not sure about the more recent box.
On both photos, the newer box is on the left side. Which is the one with the clips, that is beech? Looks like a ice cream stick wood.
I'm repairing a (newer) GCF Corona for a friend and it seems to me that everything (wood, other materials, hardware, workmanship) has gone downhill. I guess what I'm trying to say is: it could be more than the wood :( .
Yup, inadequate springs, flimsy mechanisms etc. >:(
-
I don't know where the instruments in question were made, but most of my old European Hohners seem to be made of lime (aka linden in much of the rest of the world). That, at least,is the timber I tend to use in rebuilds - largely, admittedly, because I happen to have a fairly plentiful sopply of it - and it is a widely used stable,lightweight timber in central Europe.
-
Either way, surely in the case of the 'Case', it is Ply.....so the quality/nature of the layered woods and glue will have an effect as well as the celluloid and the glue holding that ?
The older boxes look to have a good quality Birch ply construction. Heartwood Birch is reddish, the outer timber yellow, the inner harder, arguably better, the outer softer....
May be an explanation ......but may not! Northern Birch would have been a local option for a German producer and considered as a tonewood. Levin made great use of it in their instruments.
-
An excellent guitarist friend had a Levin guitar in the mid '70's.
Superb, loved it to bits... then it warped and became unplayable. Apparently a trait for Levin, so he said.
He was absolutely distraught and took him years to find anything close as a replacent.
I think then Martin bought them out to acquire their wood stock after a fire at Martin's factory?
Dredging up memories here!
-
....it was....Martin's bought the wood-stock and there was some crossover of branding for a while. I have had several Levin Guitars/Lute Guitars and Mandolins, on a 'one in-one out' basis. Their better instruments still have a following. They had a habit of butt-jointing the backs with no support, so I have had the backs off quite a few to repair. It is a mark of the quality that many are still 'close', but most display a 'gap'.
My current 'keeper' is this Mandolin, a carved, arch top and back Model 330 from 1945. Hermann Levin reputedly learnt from/in the Gibson factory and it feels like one.
Mandolin callouses play havoc with the sensitivity needed for button playing I find....along with my other general playing inadequacies!
-
Oh thanks Nigel, interesting stuff.
Not surprised there's still a following. My friend was so gutted when his Levin folded he simply shouldn't play for a while. He was totally obsessed by his and it broke his heart when it warped.
Didn't know ther was a cross over with Martins and a Gibson link too. Brings back memories when I played guitar, but my playing also explains why I jumped to reedy stuff ;D
-
An excellent guitarist friend had a Levin guitar in the mid '70's.
Superb, loved it to bits... then it warped and became unplayable. Apparently a trait for Levin, so he said.
He was absolutely distraught and took him years to find anything close as a replacent.
I think then Martin bought them out to acquire their wood stock after a fire at Martin's factory?
Dredging up memories here!
If he has the pieces left, there are guys in Sweden who can fix Levin. And they love Levin. - And know all about the instruments.
https://ackegura.proboards.com/threads/recent
-
Thanks for the thought Stockyard, but it was a long time back and time has passed by.