Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Chris Marriott on February 19, 2021, 04:05:15 PM
-
I found today that my recently acquired Pariselle had a problem: the pull F# on button 6 of the G row, and the push "high D" on button 8 were both playing without tremolo, so one of the reeds for each note had stuck.
I contacted Theo with the aim of sending the instrument back to him, and he suggested vigorously pumping the bellows while holding down the appropriate button. I must admit that I was sceptical, but I followed his advice, and rather to my surprise it worked! The F# tremolo restarted after about 30s of "pumping"; the high D took longer, but sprang back into life after several minutes.
Thanks, Theo - you're an absolute star!
Chris
-
Yes it's a useful method that deserves to be more widely known. It sounds drastic, but unless you are a circus strongman you can do it as energetically as you like without adverse effects.
-
I suspect my neighbours didn't appreciate several minutes of high D at maximum volume, but it certainly worked 😁. Thanks again!
Chris