Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: theirlandais on May 04, 2021, 06:53:34 PM
-
I'm looking to find the model number for the bellows corners of a typical 2 row 1960s Paolo soprani, they mesure about 19mm each direction and are rounded. I'm also looking for a site where are can buy them, I only need about 3 or 4
'
-
I don't know if part numbers will help you as Paolo Soprani is a different company today. But measuring the arm length as you have, and the radius of the curve (use a compass to match it, and measure the radius of the circle needed) you can source a close if not identical match. CGM, Bossetto on US eBay, and Carini are the first options that come to mind.
-
I'm looking to find the model number for the bellows corners of a typical 2 row 1960s Paolo soprani, they mesure about 19mm each direction and are rounded. I'm also looking for a site where are can buy them, I only need about 3 or 4
'
I bought some recently from Bossetto and got this chart if it helps, 35me and 35to are the only two with a 20mm size. I am trying to fix an older Columbia accordion the corners are I got match perfectly to the chart and to the ones I needed as seen in the chart, trouble is they don’t match thickness even after compression.
Not sure but why but there not the same, me thinks.
If you find you need 44ap let me know, I have a few now that I don’t see a need for.
-
When I've replaced corners on 1950s/60s/70s Paolo Sopranis I've usually not found an exact match from the new styles that are available from Italy. I couldn't match the shape exactly and the colour of the modern ones made of stainless steel is a bit garish compared with the originals which are usually nickel. I found some used ones which were a better match.