Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Rog on August 25, 2021, 09:52:15 AM
-
Working on v old boxes one often discovers little workarounds.. these are the bass valve supports (or springs) on a very handsome Jedson Soprani Paolo PA.
-
I like the little humpbacked bridge effect of pinching the helper. I tend to do that with the metal springs which I buy from Mr Marshall, as it seems to me that it delivers a little extra pressure onto the end of the valve, closing it more quickly and firmly.
-
These are basically shoe soles on top of shoe soles. But I'm sure you are going to replace them with real valves.
-
These are basically shoe soles on top of shoe soles. But I'm sure you are going to replace them with real valves.
Not sure why you don't think leather valves are real valves. Leather has been the material of valve seals on everything from bagpipes to mine-shaft pumps. Still is on bagpipes and (some) boxes.
-
These are basically shoe soles on top of shoe soles. But I'm sure you are going to replace them with real valves.
LOL
It crossed my mind. ;)
I’ve no idea why this style of 'spring' was used. But the instrument is probably 90 years old so maybe the maker was experimenting with different ideas at that time. Or didn’t have any booster springs.
-
These are basically shoe soles on top of shoe soles. But I'm sure you are going to replace them with real valves.
LOL
It crossed my mind. ;)
I’ve no idea why this style of 'spring' was used. But the instrument is probably 90 years old so maybe the maker was experimenting with different ideas at that time. Or didn’t have any booster springs.
I haven't seen booster springs on the leather valves of any pre-1935 melodeon ( Pre 1935 measured by being pitched at A435 rather than A440) . What I have seen is thicker leather used on the bass valves- giving them a length:thickness ratio comparable with the treble valves. It is also possible that the leather valve stiffeners are a later addition.
-
Working on v old boxes one often discovers little workarounds.. these are the bass valve supports (or springs) on a very handsome Jedson Soprani Paolo PA.
are you going to fit Charley's valves?
-
Working on v old boxes one often discovers little workarounds.. these are the bass valve supports (or springs) on a very handsome Jedson Soprani Paolo PA.
are you going to fit Charley's valves?
I have CariniDena bass valves, which are leather with plastic booster springs. I’ve also got leather plus metal booster springs, which take a tiny longer to fit. It’s likely I’ll fit the modern valves with plastic reinforcement..
I don’t actually know where Charlie sources his materials. I get through a lot of valves so I buy them in large quantities.