Melodeon.net Forums
Discussions => Instrument Makes and Models => Topic started by: Andrew Culwell on October 23, 2009, 05:27:32 AM
-
So I made and impulse purchase tonight, I'd been talking to Michael at Dancemaster about converting a Corso to B/C and I found this what looks to be German produced Corso. Judging from the case it's sitting in I figure it to be from the 60's or 70's and remarkably in good shape. We shall see when I get it in the post. Any Hohner experts want to take a look at it and tell me a rough guess as to when it was made? Are the new Hohner Corso's chinese made or do they still make them in Germany Here is the link to the ebay sale and yes I paid a lot but I'm going to have Michael upgrade to Binci Avional reeds I'm thinking. I really didn't want to dole out 2k for a new italian and I kind of like the weight and look of the hohners. Am I crazy?
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=200393867605&ssPageName=STRK:MEWNX:IT
-
No, not crazy - just MAD. I recall that Mark Bazely bought a Club in good condition and had Ivor Hyde re-reed it as a D/G and he used italian reeds rather than a massive retune of the original Hohner reeds. I wonder how it sounds. I have to say that Clubs are more civilized beasts than the Pokerwork, they speak more easily and have a smoother sound (technical term?). When Ivor got some new springs for mine, he got them from Switzerland and I swear they were gold plated!
Enjoy your new box!
Rob.
-
That box of Mark's is now in my workshop because the reed response is patchy to say the least. In its present state it certainly speaks a lot less easily than a pokerwork. I hope I'll be able to improve it.
-
ajay38,
Congratulations! That one looks in very good shape. Just a thought, here.... I know Michael is down here in Florida like me (though he's on the other side of the state and I haven't met him). Depending on your plans for the original Hohner reeds of your new Corso, or his plans for them if he wants them in trade, I might be able to use them, which could reduce your expenditure on the project.
I actually have a G/C Corso here, whose reedblocks would make the B/C conversion project easier , even if using all new reeds -- if as I think the G/C reedblocks are cut for larger reeds than the C/F ones. And I could use a set of C/F Corso reeds on blocks.
So, I would offer to trade the larger empty G/C Corso reedblocks I have here, plus cash, for your C/F Corso reeds on blocks. Then you would have an easier conversion project and some money off your purchase, before the conversion.
Just a thought.
I would be happy to make the appropriate donation to this forum if the trade makes sense to you and Michael. Email or PM me if so.
Paul Groff
Miami
-
That box of Mark's is now in my workshop because the reed response is patchy to say the least. In its present state it certainly speaks a lot less easily than a pokerwork. I hope I'll be able to improve it.
and the best of luck with that Theo. It's a mighty job.
-
I like a challenge :D
-
Looks like rather than the Binci since it's a Corso I'm going to just go with export or Super Dural. Since I'm such a newbie I have a feeling I probably couldn't hear the difference anyway. It's really just for bigger noisier sessions that I'm wanting the Corso for.