Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Andrew Kennedy on November 19, 2021, 07:59:35 AM
-
I have a flutina which is generally in fair nick, but the bellows corners are unprotected and some have worn through.
I never attempt my own repairs because experience shows that I'd only break something (in my diy days I once drilled through a gas pipe). As someone with this level of knowledge, it strikes me that the simplest solution would be to have metal corners fitted. That would detract from the authenticity, but I buy these things to play, not display.
The holes are little more than pinholes. Would metal corners block the succeed in blocking the leaks? Should I do it?
-
Metal corners would prevent further wear, but might not fix the leaks. A better repair method is to make a patch from some thin soft leather (goatskin is best for strength) skive the edges and glue in place.
-
You make it sound so simple, Theo. Thanks for the advice, and I'll see what the budget permits.
-
It is simple when you have the right leather, the right glued and the right knife! To quote Rosalie Dipper “the knife should be so sharp that if you dropped it you would be worried about the safety of your feet!â€
-
"and the right knife!"
Would a proper surgical style scalpel be suitable, Theo? With a straight-edged blade, obviously.
-
A fresh scalpel blade is sharp enough, but ideally you need a more rigid blade. Traditionally you do the cutting on a marble slab. I use a piece from an old fire surround.
-
For a few years I had wondered about rigidity, for keeping the action nice and easy. But I did bring back a lovely piece of highly polished Aswan granite, from Egypt a few years ago, with the express purpose of eventually having a go at this skiving lark. (I never managed to do it very much when I was working!)
-
For a few years I had wondered about rigidity, for keeping the action nice and easy. But I did bring back a lovely piece of highly polished Aswan granite, from Egypt a few years ago, with the express purpose of eventually having a go at this skiving lark. (I never managed to do it very much when I was working!)
You would be a natural!
-
The correct tool is an English Paring Knife available from bookbinders supply outlets (they’re not expensive)
The “paring stone†was / is an old printers Litho stone, they give an amazing grip and years ago were plentiful in skips around the Clerkenwell area of London. They do turn up on auction sites.
Paring is a skill and the trick is to have a knife so sharp you could shave with it. Though I wouldn’t recommend it!
-
Like this?
https://www.hewitonline.com/English_Paring_Knife_p/tl-070-pk.htm (https://www.hewitonline.com/English_Paring_Knife_p/tl-070-pk.htm)
-
Like this?
https://www.hewitonline.com/English_Paring_Knife_p/tl-070-pk.htm (https://www.hewitonline.com/English_Paring_Knife_p/tl-070-pk.htm)
.
100 per cent Winston
-
However, it will come with just raw metal at the the handle end. Make some paste, pare a strip of thin leather and wrap it round the handle.
That may have changed now, but that’s how we used to do it.
-
Nick of course is an expert parer…he is also a skilled bookbinder. I have one of those knives and it took me a while just to learn how to sharpen it (I bought a set of water stones). There are other possibilities. You can get half razor blades, which when fitted into a handle are super flexible and work pretty well for paring. You can also buy ready pared/thinned leather. C.A. Cornish can supply either pared leather (gussets, strips whatever) or super thin leather at 0.2 mm. You'll need to email them to get a price list (though tbf it’s not cheap…I have a couple of rolls of 0.2mm leather for concertina bellows).
-
"half razor blades, which when fitted into a handle"
And would that be something like this:
-
…no…like this…. You can get the blades here
https://www.ebay.co.uk/itm/100-DERBY-Premium-Single-HALF-Edged-Razor-Blades-/324753842618?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=710-127635-2958-0
-
I would imagine that it would be nighe on impossible to get any uniformity of thickness/thinness with the blade which was curved like that.
But then I haven't tried anything other than a normal surgical scalpel, which proved to be barely adequate.
-
The blade is flat. I’m pressing it against the bench to bend it 😀
I nicked the idea from this video. If you watch from 2:45 you'll see how he pares the end of a bit of leather…
https://youtu.be/2_eOUmYS-u4
-
I bought a skiving tool since i have a lot of use for it, but it only works well with certain leather. Does not work well with stretchy leather at all.
-
Aaaaah! Thank you Roger.