Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: John Burks on November 21, 2021, 12:57:23 PM

Title: Box Finish
Post by: John Burks on November 21, 2021, 12:57:23 PM
I just thought that this might be of interest to anybody undertaking a winter project.   

I have just been experimenting with finishes and have found that using an external grade, quick drying, satin, walnut wood stain (3 coats by brush and light sand) and a Hycote clear lacquer (3 floated coats) works quite well.  Takes a bit of time but the finish is good.

Just thought I would post a photo.

(https://live.staticflickr.com/65535/51693277809_91cb2b4a8f_c.jpg) (https://flic.kr/p/2mKXywv)Box finishing (https://flic.kr/p/2mKXywv) by John Burks (https://www.flickr.com/photos/192967515@N03/), on Flickr
Title: Re: Box Finish
Post by: Winston Smith on November 21, 2021, 02:34:57 PM
Nicely done, John. Bu it looks a bit 'posh' now, don't you think?
Title: Re: Box Finish
Post by: tirpous on November 21, 2021, 04:01:17 PM
You mean you find the Finnish too Polish ??  ;)

Well done indeed John !
Title: Re: Box Finish
Post by: Chris Ryall on November 21, 2021, 04:02:01 PM
Yup! But if you were to turn it upside down, Winston it might look like snobbery 😉
Title: Re: Box Finish
Post by: Pete Dunk on November 21, 2021, 04:12:15 PM
I like it, I have no problem with old boxes being tidied up unless they are something very special indeed and warrant retaining the original finish. If they are a common model that looks I’ll treated and shabby then a make over gives them a new lease of life, they may even be eye catching.
Title: Re: Box Finish
Post by: John Burks on November 21, 2021, 04:45:48 PM
Thanks 😊

Posh is good for me.  It’s what I was aiming for  ;D

It’s made from bits.  Modell 1 keyboard/ends, Erica bellows and new frames/sealing arrangement. Now working on innards.

John 😁
Title: Re: Box Finish
Post by: Helena Handcart on November 21, 2021, 05:04:00 PM
Posh is good for me.  It’s what I was aiming for  ;D

I think it's a lovely neat job. More power to you for giving bits of old boxes a new lease of life.
Title: Re: Box Finish
Post by: Pete Dunk on November 21, 2021, 05:06:06 PM
I think that’s a modell 2 or Erika keyboard, unless I’m mistaken the modell 1 only had 2 keys on the inner row? The fact that it is made from the parts of more than one box makes it fair game to finish as you see fit, it’s only a cut and shut after all!  ;D
Title: Re: Box Finish
Post by: Nigel.H on November 21, 2021, 06:28:49 PM
Modell 1's also labeled as Piccoletta's on the left hand side have x4 on the helper row' like Erika's.....  but the Erika has 11 buttons on the 'long' row whereas the 1's have only 10 ( and no doubt umpteen other variations of nomenclature exist too  )
Title: Re: Box Finish
Post by: Theo on November 21, 2021, 06:32:41 PM
Nice work!  I might have used a paler stain, but that just a personal preference.
Title: Re: Box Finish
Post by: John Burks on November 21, 2021, 06:49:50 PM
Thanks all  ;D

Agree re paler stain.  I had a few marks to cover up  ;)

They are Modell 1 "Piccoletta" ends (10+9+4).  Modell 1 "Piccoletta" can come with 2 or 4 keys on the inner.  I also have a Modell 1 "Piccolo" (11+10+4).  I really like the key action on these models and they are a lovely simple design and size.  They were both gifted to me so its important that they come back to life in their own way.  I usually prefer to keep things completely original on the outside (including scuffs, damage etc.) but on this one decided to make it "as new" but to also celebrate its nature.  Its going nowhere except here and I can really work on the reeds over time (currently being soaked).

Just finished fitting gaskets and boxing up.  Here is photo.  just watched Lester video re bushing bass buttons (thank you Lester!  ;D)

Thanks for all the replies.  This is a great forum and all input is really appreciated.

John

(https://live.staticflickr.com/65535/51696105864_c14270687b_c.jpg) (https://flic.kr/p/2mLd4d5)Piccoletta (https://flic.kr/p/2mLd4d5) by John Burks (https://www.flickr.com/photos/192967515@N03/), on Flickr


Title: Re: Box Finish
Post by: Theo on November 21, 2021, 07:55:43 PM
Nice tidy job re-finishing the treble grill too.
Title: Re: Box Finish
Post by: Pearse Rossa on November 21, 2021, 08:22:37 PM
How did you manage to get the buttons so clean and white?
Title: Re: Box Finish
Post by: John Burks on November 21, 2021, 08:37:02 PM
😊

Thanks……  but the buttons and grill are not my work. I was very kindly given the box ends in basically a refurbished state (in bits small ready for assembly). Cleaned buttons, new pallets, fully refurbished key mechanisms, fingerboard etc.  It’s one of the reasons that I want to return to a perfect and fully functioning state albeit a bit modified.

The refurbishment quality was/is wonderful!  Inspirational 😀👍

Getting it into a working state and perfectly tuned is now the  goal 😊
Title: Re: Box Finish
Post by: Winston Smith on November 21, 2021, 08:50:09 PM
"How did you manage to get the buttons so clean and white?"

I've had success with T Cut. It's a bit fiddley and gives the finger ends a bit of stick, but worth it in the end.
Title: Re: Box Finish
Post by: Dennis Steckley on June 14, 2022, 10:33:49 PM
"Reeds are soaking."  You lost me with that.  You soak your reeds?  Why and with what?
Title: Re: Box Finish
Post by: John Burks on June 17, 2022, 11:50:51 AM
"Reeds are soaking."  You lost me with that.  You soak your reeds?  Why and with what?

Hi Dennis,  I soak them in Acetone to clear off all the old wax and valve glue residue. It also degreases.
Its usually 30 minutes soak then a careful light brush with an old toothbrush while wet.  You have to be careful though as the brush bristles catch in the reed gap  (:)
SimplePortal 2.3.5 © 2008-2012, SimplePortal