Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: LDbosca on October 28, 2009, 12:19:14 AM
-
Hi,
I'm getting a new box (not for a while but still...) and I was thinking I could get my old saltarelle changed from B/C to C/C# to have as a second box for playing in Eb. Just wondering is it possible to have the existing reeds configured to a C/C# layout or would I have to get a whole new set of reeds installed?
Thanks in advance!
-
Oh, and I'm aware I'd need new bass reeds anyway, as well as a few new reeds for the change in doubled notes across d rows (E to Esharp and B to Bsharp) (:)
-
Don't see why not... there's an fair few Hohner C#/Ds about that started life as (generally less desirable) C/C#s. Cranking the reeds up a semitone should be do-able, given a competent box tech.
What is it anyhow - a Nuage or a Irish Bouëbe... or something else?
If it's a 2v, obviously the operation would be cheaper. If it's a 3v, you may want to consider selling/swapping for another box... the sound of the box in it's altered state is likely to be different (slightly brighter), and possibly not what you might have intended.
If it's an older, well bedded in, 'tin badge' model (e.g. an O'Connor signature Nuage), I'd err on keeping it as it is, and seek something else. IMHO. (:)
Oh, and I'm aware I'd need new bass reeds anyway...
I can't actually see the need for new bass reeds... if you're looking for a box optimised for playing a semitone sharp, the bass reeds should crank up just as readily.
... as well as a few new reeds for the change in doubled notes across d rows (E to Esharp and B to Bsharp) (:)
Can't quite understand what you mean here... ???
If everything's just a straight semitone crank upwards, new reeds shouldn't be needed...
Ed J
-
I'd meant change it to a C/Csharp by moving the reeds around on the reed block, putting Csharp where C was, C where B was...or something...
Anyway, good to know it could be tuned up without that kinda messing around, it's an Irish Bouëbe, being replaced by a 3voice Gaillard...in 2011!
-
Wouldn't you need a D/D# box to play in Eb?
-
Wouldn't you need a D/D# box to play in Eb?
Only if you play C#/D, but he's a B/C player - in which case a D/D# is an F box...