Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: michik on October 28, 2009, 11:04:04 PM

Title: Eight Stop Monster Melodeon ....
Post by: michik on October 28, 2009, 11:04:04 PM
My most recent ebay purchase is a quite large melodeon with 8 (eight) stops  :o
Unfortunately the reed blocks fell apart more or less completly
and turned into a big mess, so it was impossible to find the actual voice
configuration.
I was able to reconstruct the right order of the reeds
more or less by matching the folds of the wax on the reeds and the reed blocks

I will add some photos later.
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on October 28, 2009, 11:09:45 PM
Images
1) Reed mess
2) Hohner Erica vs. Orchester Accordeon
3) Treble side
4) Eight stops
Title: Re: Eight Stop Monster Melodeon ....
Post by: pgroff on October 28, 2009, 11:15:34 PM
I like it!

PG
Title: Re: Eight Stop Monster Melodeon ....
Post by: Owen Woods on October 29, 2009, 12:31:55 AM
So it'd basically two four stops stuck together, accessed by a one row fingerboard... Blimey :P
Title: Re: Eight Stop Monster Melodeon ....
Post by: nfldbox on October 29, 2009, 12:50:52 AM
Just looking at that thing overwhelms me. I wonder how much armpower it takes to get all eight going at once.
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on October 29, 2009, 10:17:28 AM
I'll try to rebuild the reed blocks ... during sorting the reeds I noticed that such 'catastrophe' seemed to had happen at least once before during its 'live time' or it was 'rereeded' completelly.

I'm really looking forward to get it working again and listen the the sound it will make
... all other parts are ok, bellow tight, no missing parts (except the air valve ... does anybody have a spare air valve like one used on old 1-row melodeons ? ) ... there is only the reed mess to be fixed  :Ph
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on October 29, 2009, 12:44:42 PM
Actually this was posted once on concertina.net
http://media.photobucket.com/image/8%20voice%20melodeon/StephenChambers/Accordions/oldbox.jpg
Title: Re: Eight Stop Monster Melodeon ....
Post by: Theo on October 29, 2009, 01:48:52 PM
... does anybody have a spare air valve like one used on old 1-row melodeons ? ) ... t

What kind of air valve?  Is it the 'spoon' shape as used by Hohner?  If you could post a photo showing where it fits, or of the bass valves if they are the same I'll look and see if I have something suitable.
Title: Re: Eight Stop Monster Melodeon ....
Post by: Hasse on October 29, 2009, 07:44:00 PM
My most recent ebay purchase is a quite large melodeon with 8 (eight) stops  :o
Actually this was posted once on concertina.net
http://media.photobucket.com/image/8%20voice%20melodeon/StephenChambers/Accordions/oldbox.jpg

 :o FANTASTIC :o But are you sure it's melodeons? It looks more like aliens to me  ;D
Title: Re: Eight Stop Monster Melodeon ....
Post by: hibbs3 on October 29, 2009, 08:43:38 PM
these things look vicious! ;D
Title: Re: Eight Stop Monster Melodeon ....
Post by: Bocsa on October 29, 2009, 09:03:54 PM
Actually this was posted once on concertina.net
http://media.photobucket.com/image/8%20voice%20melodeon/StephenChambers/Accordions/oldbox.jpg
Oh Dear Lord!! :o
Title: Re: Eight Stop Monster Melodeon ....
Post by: Ollie on October 29, 2009, 11:43:58 PM
Actually this was posted once on concertina.net
http://media.photobucket.com/image/8%20voice%20melodeon/StephenChambers/Accordions/oldbox.jpg

Is that thing legal?!?!  :o
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on October 30, 2009, 12:48:50 PM
... does anybody have a spare air valve like one used on old 1-row melodeons ? ) ... t

What kind of air valve?  Is it the 'spoon' shape as used by Hohner?  If you could post a photo showing where it fits, or of the bass valves if they are the same I'll look and see if I have something suitable.

Air hole diameter is 22 mm, I have also attached a photo of one of the bass valves
Title: Re: Eight Stop Monster Melodeon ....
Post by: HallelujahAl on October 30, 2009, 02:04:24 PM
I've got some you could have.Will just have to check the diameter.
AL
Title: Re: Eight Stop Monster Melodeon ....
Post by: Lars on October 30, 2009, 08:46:52 PM
Well, I've seen a few 8 voice boxes around made in reasonable sizes. I have, however, also seen one of these vintage 8 stops, and it's big. It's a VERY large thing, but a fun project I'd imagine:)
Title: Re: Eight Stop Monster Melodeon ....
Post by: triskel on October 30, 2009, 09:45:02 PM
Well, I've seen a few 8 voice boxes around made in reasonable sizes. I have, however, also seen one of these vintage 8 stops, and it's big. It's a VERY large thing ...

Was that the one in my house?  ;)

(Not forgetting it's 6-stopper cousin ...)
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on October 31, 2009, 10:41:02 PM
Today I have started to work on the reed blocks, and it seems to have a LLMMMHHH voice configuration,
the 10th (highest) note has only LLMMM, the HHH reeds are missing ... maybe never built in or missing since last repair decades ago.
Title: Re: Eight Stop Monster Melodeon ....
Post by: Lars on November 01, 2009, 09:56:27 AM

Was that the one in my house?  ;)

(Not forgetting it's 6-stopper cousin ...)

Yep, that's the one.

(Though I'd rather fancy seeing at least 10 OTHER boxes of yours fixed up before that 8-stopper)
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on March 08, 2010, 06:49:58 PM
Recently 6-stop melodeons of this style appeared on german ebay

If you are interested to get one  ...

http://cgi.ebay.at/ws/eBayISAPI.dll?ViewItem&item=330410827846 (ends March 11th)
http://cgi.ebay.at/ws/eBayISAPI.dll?ViewItem&item=170453165104 (ends March 11th)


Refurbishing is in progress, only revalving and waxing of the reeds has to be done then
it is finished.
I'm still in the need of an air valve  ...
Title: Re: Eight Stop Monster Melodeon ....
Post by: Theo on March 08, 2010, 06:56:38 PM

I'm still in the need of an air valve  ...

From the picture you posted earlier I'm sure that a Hohner valve as used on  the 114 would fit straight on and would look correct.
Title: Re: Eight Stop Monster Melodeon ....
Post by: HallelujahAl on March 09, 2010, 05:09:32 PM
Sorry michik - I forgot to get back to you about the air valve. Will check my little box of spares tonight and email you asap.
Regards, AL
Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on March 13, 2010, 01:15:57 AM
@HallelujahAl: Thanks for looking. If you do not find one, it doesn't matter, i'll try to get a melodeon wreck via ebay :-)

This melodeon is currently my second refurbishment project:

reed blocks rebuild and I have build a completly new "removeable reed block" mechanism, because the reeds block
had been glued directly to the treble side.
(http://img7.myimg.de/trebleend97112_thumb.jpg) (http://www.myimg.de/?img=trebleend97112.jpg)

No reed mess anymore ... I have cleaned and sorted all the reeds
The whole thing is tuned in D, and has following notes
F#/G  A/C#  D/E  F#/G  A/B  D/C#  F#/E  A/G  D/B  F#/C#
In the following photo it is clearly visible that it has a LLMMMHHH configuration
Unfortunately, few reeds are missing.
(http://img7.myimg.de/reedsbc51f_thumb.jpg) (http://www.myimg.de/?img=reedsbc51f.jpg)

Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on March 14, 2010, 01:28:41 AM
Today was 'valve day' :-)  

For the "Sticky stuff" thread: I'm using a water-based 'household glue' (made by Pattex, http://www.pattex.de/Pattex-Transparent-LF-Haushalts-Kleber.1492.0.html )  for the valves


Title: Re: Eight Stop Monster Melodeon ....
Post by: michik on March 22, 2010, 12:32:29 AM
Today the monster got to live again again  :|||:  >:E

Sound is nice, although it is quite out of tune,
and it is quite hard work to get some music out of it.
The highest reeds to not work really, perhaps I messed up the air ways
or it is not possible to generate a high enough pressure with the quite large bellow
SimplePortal 2.3.5 © 2008-2012, SimplePortal