Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Ben Prout on April 01, 2022, 02:49:32 PM

Title: Basses need looking at
Post by: Ben Prout on April 01, 2022, 02:49:32 PM
I purchased a second hand G/C pokerwork and it arrived today. It sounds lovely aside from the basses. My Aminor bass rattles something inside quite loudly and has a sort of...well...farty sound? And my F bass is barely audible when playing a treble note, and takes some real gusto to make a loud note. Is this easily fixable as money is a little tight and I don't know how much it would cost to have it fixed?

The outside basses don't have an issue and all chords work fine, although I aim to tape the thirds.

I know nothing about melodeon repair or maintenance so some honest advice would be great.
Title: Re: Basses need looking at
Post by: Winston Smith on April 01, 2022, 03:30:31 PM
If the 4 bellows pins will come out without much trouble, it's worth your while to take the bass end off and have a quick shufti. You might find that there's something visible amiss which you can fix in a jiffy? Or you could maybe see something which is obviously wrong but beyond your confidence to have a go at, then at least you'd know what to ask a fettler about.
Title: Re: Basses need looking at
Post by: John Burks on April 01, 2022, 03:32:50 PM
Sounds like a loose reed plate and a poorly gapped reed.  Agree ….. worth taking a look.

You will soon see the issue and it’s a quick job to sort.

John
Title: Re: Basses need looking at
Post by: Anahata on April 01, 2022, 03:56:32 PM
The weak F bass could also be a valve that's a bit too stiff or partially stuck so it's not opening fully.
Title: Re: Basses need looking at
Post by: Theo on April 01, 2022, 05:52:15 PM
All the above are good ideas, but if you have no previous experience you may not be able to identify the problem from just looking.  It would be better if you could bet someone knowledgeable to take a look.

Lester Bailey is not far from you.
Title: Re: Basses need looking at
Post by: Arnold on April 01, 2022, 09:25:37 PM
I purchased a second hand G/C pokerwork and it arrived today. It sounds lovely aside from the basses. My Aminor bass rattles something inside quite loudly and has a sort of...well...farty sound? And my F bass is barely audible when playing a treble note, and takes some real gusto to make a loud note. Is this easily fixable as money is a little tight and I don't know how much it would cost to have it fixed?

The outside basses don't have an issue and all chords work fine, although I aim to tape the thirds.

I know nothing about melodeon repair or maintenance so some honest advice would be great.

I had/have a similar issue. My pull dominant bass note was sounding very reluctantly (but usually not at all rather than just quietly so maybe a different issue) unless I pulled rather hard on the bellows. I decided to have a go at it myself so removed the plate carefully using a scalpel, and poked the reed through the slot a few times until the gap was reduced somewhat. This worked quite well, except that the push bass note then started making the kinds of sounds you describe! I'm hoping it's just the poor job I did at re-waxing since I only used what was already there, which may have left the plate a little loose, but I still haven't got around to getting some wax. The best course of action would be to send to someone who knows what they're doing, but then the energy company got in touch...  :-\
Title: Re: Basses need looking at
Post by: Ben Prout on April 02, 2022, 07:42:13 AM
Hello everyone, thank you for your helpful replies. I plan on having a fiddle around later today or tomorrow. But yes as Theo stated, I may not be able to accurately discern what's an issue and what isn't so I'll do some research and attach some pictures too.
Title: Re: Basses need looking at
Post by: Tone Dumb Greg on April 02, 2022, 09:25:24 AM
Hello everyone, thank you for your helpful replies. I plan on having a fiddle around later today or tomorrow. But yes as Theo stated, I may not be able to accurately discern what's an issue and what isn't so I'll do some research and attach some pictures too.

There's every chance that the problems will be straight forward for someone with the right knowledge and experience.

A lot depends on where you are and where the nearest fettler is. It's worth giving a general idea of where you live. I'm lucky enough to live fairly near to a couple of excellent fettlers and they are happy to let me watch and educate me while they work.They are, also, quick to say if a job is likely to be more involved and, hence, more expensive.
Title: Re: Basses need looking at
Post by: Chris Ryall on April 02, 2022, 01:13:43 PM
Unless it is a fairly trivial problem, I always tend to use an experienced fettler. Theo is my personal favourite, as he lives conveniently near my mother. But there are many others. (Maybe this forum could post up a list of names and addresses)?

I too am horrified at the triple whammy of economic stagnation, fuel inflation, and this dreadful war. But let’s remember that “fettlers” have to make a living too. I hope everybody will keep what hobby :neigh: money they have moving round, as best they can 🥴
Title: Re: Basses need looking at
Post by: Theo on April 02, 2022, 01:27:31 PM
That’s why I suggested Lester a few posts back.  Lives in the same county according to the OPs profile
Title: Re: Basses need looking at
Post by: Rog on April 02, 2022, 01:33:37 PM
If you are down near Newbury then I’m just a few miles south of there near Andover. See my website for contact details.
SimplePortal 2.3.5 © 2008-2012, SimplePortal