Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Tony Cipriano on May 17, 2022, 09:54:00 PM
-
Hello friends ,so I just got a.midi system Installed in to my diatonic accordion with an external power adaptor ,so I leave in the US and the system was installed in Italy therefore the midi was adapter is 220 volts vs 110 volts here in the US, I purchased a simple up voltage converter but it dosen't work I'm not sure if is power issue or something else,basically nothing happens, im using a Korg arranger keyboard pa 1000 and 2 different midi cables but nothing the midi system In the accordion appears to be dead.....maybe is the adapter or something....anyone had this issue ?? Thanks in advance
-
Surely the people who installed it should be the people to ask?
-
It you look on the 220v adaptor, it should tell what voltage it is outputting, polarity, etc.
Then source a 110v adaptor to give same outputs from Amazon or similar.
-
Yes of course but I want to make sure that is not power issue first
-
I ordered a external voltage converter, so ..I will let you know
-
A good electrician, even an experienced hobbyist could sort this for you. It needs test equipment, including a mains tester!
-
Was Italian adaptor supplied for use on the American grid system?
I agree with Winston, though, your first recourse should be to discuss your issue with the supplier.
-
Hello and thank you, the new up voltage converter worked
-
Chris Ryall that would be my next step
This converter that I bought is good but os the software a small shoes box and is heavy