Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Fanie on June 07, 2022, 02:10:33 PM

Title: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 07, 2022, 02:10:33 PM
I bought this "A" melodeon and almost all the reeds were broken and rusted. So I ordered a new set of "C" reeds for it from Harmonika in Czech Republic. I received the reeds, but it seems they are for a Hohner 114, 4-stop. There are 4 sets of 10 treble reeds, small to large- I assume each is an octave apart. Then there are 2 bass and 2 chord reeds.
On the melodeon there is space for two sets of 10 treble reeds, I assume tremolo tuned, and 4 bass and 6 chord reeds.
Please help, which reeds should I put in, or should I rather order another set?
Thanks for you help.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: rees on June 07, 2022, 02:27:54 PM
I would think it's best to order another set as you will have 20 treble reeds left over and you will need 4 more bass reeds if you fit the reed set that you have.
What grade are the Harmonikas reeds? If they are TAM or higher I may be interested in buying them.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 08, 2022, 10:01:02 AM
The reeds are machine type quality.
My problem is, I am in South Africa and shipping to me is very expensive.
If I only put the highest pitch set of reeds in it, will I not get a concertina sound out of it?  ;)
Thanks
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Winston Smith on June 08, 2022, 10:46:58 AM
Normally, you'd put in the two sets of 'middle' treble reads, but you could also try a middle and low set for the bandonion effect. But you'd still be in trouble with the bass end.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 08, 2022, 11:43:49 AM
Ok, the melodeon has on the bass end, 6 chord reeds and 4 bass reeds. What is the tuning these reeds, so that I can order them?
Thanks
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 08, 2022, 11:56:26 AM
This is the bass end reeds that I received. What if I put them in and just block the open holes with card board?
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Winston Smith on June 08, 2022, 12:16:01 PM
Don't rightly know whether it's possible, but I suspect that some of the spare treble reeds could be retuned a bit to make up most of your chord reeds, and also your higher octave bass reeds too. Is there no one reasonably near to you who could help you, surely you're not the only squeezebox enthusiast in SA? (I realise that it's a big country, mind.)
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Theo on June 08, 2022, 12:33:54 PM
The usual setup for the second pair of buttons is to have F bass and F major chord in both directions. So you need a low bass and a mid bass F, and for the chords you need F A and C.   Because they are the same on both directions you could harvest the reeds from a scrap piano accordion.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Malcolm Clapp on June 08, 2022, 01:54:28 PM
What Theo said. But if you can't get hold of a cheap scrapper, maybe talk to The Accordion Clinic in Pretoria. I've heard they are pretty helpful with spare parts. I'm sure their number will be in the phone book....

If you get really stuck, send me a pm. I have the 5 reeds you need, new-old stock Hohners with valves, never played. Postage might be a deal breaker though. The only risk is that they may sound nothing like the Czech reeds you already have; I have never heard them played, so can't compare.

Good luck.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 08, 2022, 03:32:54 PM
Thank you for the help, I appreciate it.
I don't know of any other melodeon players in SA. Maybe I am the last one.
I do have a scrap 120 bass piano accordion. Can you please explain to me "very slowly  :o " (because I am totally musical illiterate), which reeds I can harvest and where should put them?
Thank you for the help.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Theo on June 08, 2022, 04:13:42 PM
Take the list I gave you earlier, then look in the bass end of your pa.  Choose the reeds by size, and with the correct notes.  You will need a way to sound the notes so that you can then use an electronic tuner to identify the F G and A.
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Fanie on June 09, 2022, 08:16:21 AM
Thank you Theo, is it F,A an C, or F,A and G?
Thanks
Title: Re: New "C" reeds for Hohner 1 row, 4 bass
Post by: Theo on June 09, 2022, 09:52:53 AM
Sorry my mistake F A and C is what you want. That makes an F chord
SimplePortal 2.3.5 © 2008-2012, SimplePortal