Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: Squeaky Pete on June 29, 2022, 09:19:38 AM

Title: Re-taping bellows colour bleed
Post by: Squeaky Pete on June 29, 2022, 09:19:38 AM
I'm re-taping a HA114 and it's one of the later ones. The red tape was falling off but the gold was fairly good.
Under the gold the warm water used to clean off the glue has left the paper looking nice and clean but where I've done this to the red, it has left the white paper stained pink.
I don't want partially pink bellows. Any thoughts?
Title: Re: Re-taping bellows colour bleed
Post by: Winston Smith on June 29, 2022, 09:40:02 AM
Edward the Butcher here!
I've sorted this problem by leaving on the paper tape which won't come off easily, and then taping over the top of it.
SimplePortal 2.3.5 © 2008-2012, SimplePortal