Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: dino.pafftti on August 09, 2022, 05:52:13 AM
-
Hi, I'm tuning a 1-row Hohner -C ... Here's the diagram, is it good, ?? Should I change it diagram ??
-
The thing is this….tune one reed to concert pitch and then the other by ear, and listen to the tremolo beats. The cent offset in your chart is a good starting point, but it isn't what you hear, so it doesn’t actually tell you what the target tremolo beat is.
-
The thing is this….tune one reed to concert pitch and then the other by ear, and listen to the tremolo beats. The cent offset in your chart is a good starting point, but it isn't what you hear, so it doesn’t actually tell you what the target tremolo beat is.
Thank you,,
My problem is, I'm a very bad player, I don't know what a good tremolo would be, That's why I'd like some kind of diagram to tune by
-
The diagram is from measurements of the pitch of the tremolo reed as it is now. Is that correct? There should be a gradual change as you go from note to note. Some of the notes are out of line, they are the ones that might be improved. But the errors are quite small compared to the amount of tremolo so you probably won’t notice much difference in the sound.
-
Thanks Theo.
this is a big help,,,