Melodeon.net Forums

Discussions => Instrument Makes and Models => Topic started by: Steve P. on September 26, 2022, 02:55:43 AM

Title: First post ever - Model Identification - Quebec
Post by: Steve P. on September 26, 2022, 02:55:43 AM
Hi there

First post ever on this forum, so what's better than to begin by asking for help??  ;D

Little introduction: as you can see by the 5 grammar error in the only one sentence I wrote, i'm a french Quebecor. That been said, I may had listen more to accordion players than to english teachers, but am I really to blame by choosing Yves Lambert, Marcel Messervier, Phillipe Bruneau, etc etc ???

I knew you would understand ;)

So here I am! I'm aslo new at playing the instrument itself (yup it took a pandemic  :-\) but I already have some weapons in hand.
There's only one big thing missing, an accordion in the key of D. Wich in Québec is really a noticable void!

So I need your help if anyone can identify the maker of this black beauty, seller said it's a Robert Boutet made, but an other folk told me about Gilles Paré maybe..

And how about bellow tape being stick all around? Can anyone confirm that this can be a suitable method by putting tape over the metal corner ? Because it seems to have metal corner underneath right?

Thanks in advance and pleasure to be among you!
Title: Re: First post ever - Model Identification - Quebec
Post by: baz parkes on September 26, 2022, 10:17:18 AM

Little introduction: as you can see by the 5 grammar error in the only one sentence I wrote, i'm a french Quebecor. That been said, I may had listen more to accordion players than to english teachers,"

"Guilty your Hohner" (:)
For someone who didn't listen to his English teachers that's very very good. Chapeau... :|glug :|glug

Can't help with box ID I'm afraid, but welcome aboard.

Title: Re: First post ever - Model Identification - Quebec
Post by: tirpous on September 26, 2022, 02:41:53 PM
You could contact Robert Boutet and ask him.  But his instruments often have a metal plate with his name on it, which I don't see on this box.  There are a couple of Boutet boxes currently for sale on Facebook, if you want to compare.

I don't think there are metal corners under the tape (if present they would telegraph through).  Tape all around is something that was done on many older Quebec boxes, it should not be a problem.

The shape of the metal corners, the 'hologram' tape on the frames and tape-all-around on the bellows very much remind me of Caron boxes (made in Rivière-Bleue).

Welcome from another french québecois !
Title: Re: First post ever - Model Identification - Quebec
Post by: Chris Ryall on September 26, 2022, 03:04:52 PM
Tu es bienvenu, au bon endroit, Steve ! Il y a beaucoup de sagesse ici.

C’ est rare de voir le se coucher du soleil, sans avoir reçu de réponse à ta question 👍
SimplePortal 2.3.5 © 2008-2012, SimplePortal