Melodeon.net Forums
Discussions => Instrument Design, Construction and Repair => Topic started by: Squeaky Pete on November 07, 2022, 09:05:29 AM
-
Having just pretuned all the treble reeds for a GCF box and done my neatest waxing job so far, I find I've flipped some of the + reeds with the - ones.
I can't leave it and have odd pairs on the wrong side, can I?
In 30 years someone will do a bit of spot tuning and my sins will find me out. Then they'll say "what a plonker!" and my 'reputation' will be in shreds.
I'm going to have to redo it. Gaaahhhhhh!!!!!!!!
-
Best to do the right thing!
-
I guess that most of us couldn’t rest easy with one of our created mistakes lurking inside...
You are not alone ...and you already seem to know the penance (:)
-
If you mean you have tuned them correct like that ,the note is not actually reversed then leave them like that.Mark them with a clear indelable pen or leave a note for any future fettler who will arrive in 50 years.
-
Personally, I don't think your nice waxing job needs to suffer much. You can make shallow cuts in the wax along the reedplate edge with a scalpel, then pop the reeds out by pushing on the plate from the inside. The affected reeds should be the same heights so you can swap them and then re-flow the wax to seal them in.
-
Agree with Gonk. It’s really not a big job to swap the reedplates and should only take a few minutes. Best to do it right!
-
All done.
I was never planning to leave something nasty for a future fettler.
Just putting off the inevitable really