Melodeon.net Forums

Discussions => Instrument Design, Construction and Repair => Topic started by: gmatkin on November 04, 2009, 09:09:15 PM

Title: Buying new reeds, learning how to set them and tune (a little)
Post by: gmatkin on November 04, 2009, 09:09:15 PM
I've had a reed peg out on me. Now, I'm new to this - where does one buy new reeds for a Hohner melodeon please?

And if fixing the thing in place and tuning it turns out to be beyond this bodger (yes, I build boats but I'm still a bodger) is there someone in mid-West Kent I can turn to for repairs like this please?

Gav 
Title: Re: Buying new reeds, learning how to set them and tune (a little)
Post by: Owen Woods on November 04, 2009, 09:47:32 PM
You build boats? Nice (:) What kind?

(can't help with your actual query unfortunately)
Title: Re: Buying new reeds, learning how to set them and tune (a little)
Post by: Pete Dunk on November 04, 2009, 11:24:57 PM
Theo can probably supply you with a new reed plate, generally supplied tuned about 10 cents sharp. If it's just an odd plate I'll wax it in and should be able to fine tune it for you. Is it one of the Hohner one rows?

Pete.
Title: Re: Buying new reeds, learning how to set them and tune (a little)
Post by: gmatkin on November 05, 2009, 01:47:21 PM
Peter:

It is, and I'm grateful for the offer of help. Really, I've got to learn how to do all this stuff for myself, so the way to do it might be for you to supervise and advise me while I learn on the job. You won't be amazed to learn that the reed in question is the one we had a bad feeling about...

Ukebert:

The story is far to large and rambling to tell on a melodeon forum, but a good place to start might be my boat nut website http://intheboatshed.net . If you're one of us (and from your profile pic I guess you must be) you could be in there for hours.

Don't say you haven't been warned...

Gav
SimplePortal 2.3.5 © 2008-2012, SimplePortal